ISrvMonAppBusBindingStats (Talon 3.14.19 API)

All Superinterfaces:: IRogValidatable

All Known Implementing Classes:: SrvMonAppBusBindingStats

@Generated(value="com.neeve.adm.AdmGenerator",
           date="Thu May 07 15:37:32 EDT 2020")
@AdmGenerated(compatLevel="4.0.0",
              admVersion="nvx-rumi-adm v3.14 (build 29)",
              date="5/7/20 3:37 PM",
              buildInfo="nvx-talon-3.14.19 (nvx-codegen-plugin)")
public interface ISrvMonAppBusBindingStats
extends IRogValidatable

Records statistics for a message bus binding.

ADM Details

ADM Type	Embedded Entity
Factory	SrvMonFactory

ADM Field Summary

Field	Type	Id	Description
busBindingName	String	1	The name of the bus.
createToSendLatencies	`SrvMonIntSeries`	21	The create to send latencies in microseconds, the time in microseconds from message creation to when send was called for it (aka 'c2o').
deserializeLatencies	`SrvMonIntSeries`	27	The time (in microseconds) spent deserializing the message and wrapping it in a MessageView (aka: 'd').
deserializeToReceiveLatencies	`SrvMonIntSeries`	28	The time (in microseconds) from when the message was deserialized to when it is received by the engine (aka: 'd2i'). This measure the time from when the bus has deserialized by the bus to when the app's engine picks it up from it's input queue (before it dispatches it to an application) handler (it includes the o2p time of the engine's disruptor). Additional time spent by the engine dispatching the message to the application handler is covered by msgPreProcLatencies (mpproc).
detachedCommit	Boolean	31	If the bus binding is operating in detached mode.
disruptorStats	`SrvMonDisruptorStats`	32	Disruptor statistics for the bus when operating in detached mode.
internal	Boolean	33	Indicates if this is an internal bus.
numAcksSent	Long	34	The number of inbound messages acknowledged by the bus.
numAsyncFlushCompletions	Long	10	The number of asynchronous flushes for this that have completed.
numBindingFailures	Integer	20	The number of binding failures that have occurred for this bus.
numChannelsUp	Integer	19	The number of channels brought up by this bus.
numClients	Integer	18	The number of connected clients (if applicable).
numCommits	Long	16	The number transactions committed by the bus.
numFlushesAsync	Long	9	The number of times this bus has been asynchronously flushed.
numFlushesSync	Long	7	The number of times this bus has been synchronously flushed.
numMsgBatchesRcvd	Long	4	The number of batch messages received by the bus.
numMsgsEnqueued	Long	5	The total number of batch messages enqueued for delivery by this bus.
numMsgsFlushedAsync	Long	11	The number of messages flushed by asynchronous flushes.
numMsgsFlushedSync	Long	8	The number of messages flushed by synchronous flushes.
numMsgsInBatchesRcvd	Long	3	The number of messages received by the bus that were part of a batch.
numMsgsRcvd	Long	2	The number of messages received by the bus.
numMsgsSent	Long	6	The total number of batch messages enqueued message that were actually sent by the bus.
numPacketsRcvd	Long	15	The number of raw packets received by the bus.
numPartialRollbacks	Long	37	The number of partial (savepoint) transaction roll back for the bus.
numRollbacks	Long	17	The number transactions rolled back for the bus.
numStabilityBatchesRcvd	Long	14	The number of batched stability events received by this bus.
numStabilityInBatchesRcvd	Long	13	The number of stability events received by this bus that were part of a stability batch.
numStabilityRcvd	Long	12	The number of stability events (acks) received by this bus.
originToReceiveLatencies	`SrvMonIntSeries`	29	The origin to receive latencies in microseconds (aka: 'o2i'). The time from when a message was originally created to when it was received by the binding.
sendToPollLatencies	`SrvMonIntSeries`	35	When the bus is operating in a detached mode, the time from when the message was offered for send until it is picked up send is started (aka: 'o2p').
sendToSerializeLatencies	`SrvMonIntSeries`	22	The send to serialize latencies in microseconds, the time from when the message send is started until it was serialized in preparation for transmission on the wire (aka: 'o2s'). Note that this time excludes o2p for the case where the binding is operating in detached mode.
serializeLatencies	`SrvMonIntSeries`	23	The serialize latencies in microseconds, the spent serializing the MessageView to its transport encoding (aka: 's').
serializeToWireLatencies	`SrvMonIntSeries`	24	The serialize to wire latencies in microseconds, the time post deserialize to when just before the message is written to the wire (aka: 's2w').
wireLatencies	`SrvMonIntSeries`	25	The wire latencies in microseconds, the time an inbound message spent on the wire (aka: 'w'). The time spent on the wire from when the message was written to the wire by the sender to the time it was received off the wire by the receiver. Note: that this metric is subject to clock skew when the sending and receivin sides are on different hosts.
wireSendLatencies	`SrvMonIntSeries`	36	The wire send latencies in microseconds, he time spent by the message bus provider writing the message to the wire. (aka: 'ws'). This time covers an time spent blocked in the provider due to flow control and time in the provider implementation's send api.
wireToDeserializeLatencies	`SrvMonIntSeries`	26	The time from when the serialized form was received from the wire to deserialization (aka: 'w2d').
wireToWireLatencies	`SrvMonIntSeries`	30	The wire to wire latencies in microseconds, for outbound messages the time from when the corresponding inbound message was received off the wire to when the outbound message was written to the wire. (aka: 'w2w'). This measurement is useful for determine how long the process spent from receiving a message to making its effects to the world 'known'.

Method Summary

Methods
Modifier and Type	Method and Description
`void`	`clearBusBindingName()` Clears the value of 'busBindingName'.
`void`	`clearCreateToSendLatencies()` Clears the value of 'createToSendLatencies'.
`void`	`clearDeserializeLatencies()` Clears the value of 'deserializeLatencies'.
`void`	`clearDeserializeToReceiveLatencies()` Clears the value of 'deserializeToReceiveLatencies'.
`void`	`clearDetachedCommit()` Clears the value of 'detachedCommit'.
`void`	`clearDisruptorStats()` Clears the value of 'disruptorStats'.
`void`	`clearInternal()` Clears the value of 'internal'.
`void`	`clearNumAcksSent()` Clears the value of 'numAcksSent'.
`void`	`clearNumAsyncFlushCompletions()` Clears the value of 'numAsyncFlushCompletions'.
`void`	`clearNumBindingFailures()` Clears the value of 'numBindingFailures'.
`void`	`clearNumChannelsUp()` Clears the value of 'numChannelsUp'.
`void`	`clearNumClients()` Clears the value of 'numClients'.
`void`	`clearNumCommits()` Clears the value of 'numCommits'.
`void`	`clearNumFlushesAsync()` Clears the value of 'numFlushesAsync'.
`void`	`clearNumFlushesSync()` Clears the value of 'numFlushesSync'.
`void`	`clearNumMsgBatchesRcvd()` Clears the value of 'numMsgBatchesRcvd'.
`void`	`clearNumMsgsEnqueued()` Clears the value of 'numMsgsEnqueued'.
`void`	`clearNumMsgsFlushedAsync()` Clears the value of 'numMsgsFlushedAsync'.
`void`	`clearNumMsgsFlushedSync()` Clears the value of 'numMsgsFlushedSync'.
`void`	`clearNumMsgsInBatchesRcvd()` Clears the value of 'numMsgsInBatchesRcvd'.
`void`	`clearNumMsgsRcvd()` Clears the value of 'numMsgsRcvd'.
`void`	`clearNumMsgsSent()` Clears the value of 'numMsgsSent'.
`void`	`clearNumPacketsRcvd()` Clears the value of 'numPacketsRcvd'.
`void`	`clearNumPartialRollbacks()` Clears the value of 'numPartialRollbacks'.
`void`	`clearNumRollbacks()` Clears the value of 'numRollbacks'.
`void`	`clearNumStabilityBatchesRcvd()` Clears the value of 'numStabilityBatchesRcvd'.
`void`	`clearNumStabilityInBatchesRcvd()` Clears the value of 'numStabilityInBatchesRcvd'.
`void`	`clearNumStabilityRcvd()` Clears the value of 'numStabilityRcvd'.
`void`	`clearOriginToReceiveLatencies()` Clears the value of 'originToReceiveLatencies'.
`void`	`clearSendToPollLatencies()` Clears the value of 'sendToPollLatencies'.
`void`	`clearSendToSerializeLatencies()` Clears the value of 'sendToSerializeLatencies'.
`void`	`clearSerializeLatencies()` Clears the value of 'serializeLatencies'.
`void`	`clearSerializeToWireLatencies()` Clears the value of 'serializeToWireLatencies'.
`void`	`clearWireLatencies()` Clears the value of 'wireLatencies'.
`void`	`clearWireSendLatencies()` Clears the value of 'wireSendLatencies'.
`void`	`clearWireToDeserializeLatencies()` Clears the value of 'wireToDeserializeLatencies'.
`void`	`clearWireToWireLatencies()` Clears the value of 'wireToWireLatencies'.
`String`	`getBusBindingName()` Gets the value of 'busBindingName'.
`<T extends XString> T`	`getBusBindingNameTo(XString.Factory<T> factory)` Copies the value of this String field into a new XString from the given factory.
`void`	`getBusBindingNameTo(XString val)` Copies the value of 'busBindingName' into the provided XString.
`XString`	`getBusBindingNameUnsafe()` Gets the raw value of 'busBindingName'.
`SrvMonIntSeries`	`getCreateToSendLatencies()` Gets the value of 'createToSendLatencies'.
`void`	`getCreateToSendLatenciesTo(SrvMonIntSeries val)` Copies the value of SrvMonIntSeries into the provided value.
`SrvMonIntSeries`	`getDeserializeLatencies()` Gets the value of 'deserializeLatencies'.
`void`	`getDeserializeLatenciesTo(SrvMonIntSeries val)` Copies the value of SrvMonIntSeries into the provided value.
`SrvMonIntSeries`	`getDeserializeToReceiveLatencies()` Gets the value of 'deserializeToReceiveLatencies'.
`void`	`getDeserializeToReceiveLatenciesTo(SrvMonIntSeries val)` Copies the value of SrvMonIntSeries into the provided value.
`boolean`	`getDetachedCommit()` Gets the value of 'detachedCommit'.
`SrvMonDisruptorStats`	`getDisruptorStats()` Gets the value of 'disruptorStats'.
`void`	`getDisruptorStatsTo(SrvMonDisruptorStats val)` Copies the value of SrvMonDisruptorStats into the provided value.
`boolean`	`getInternal()` Gets the value of 'internal'.
`long`	`getNumAcksSent()` Gets the value of 'numAcksSent'.
`long`	`getNumAsyncFlushCompletions()` Gets the value of 'numAsyncFlushCompletions'.
`int`	`getNumBindingFailures()` Gets the value of 'numBindingFailures'.
`int`	`getNumChannelsUp()` Gets the value of 'numChannelsUp'.
`int`	`getNumClients()` Gets the value of 'numClients'.
`long`	`getNumCommits()` Gets the value of 'numCommits'.
`long`	`getNumFlushesAsync()` Gets the value of 'numFlushesAsync'.
`long`	`getNumFlushesSync()` Gets the value of 'numFlushesSync'.
`long`	`getNumMsgBatchesRcvd()` Gets the value of 'numMsgBatchesRcvd'.
`long`	`getNumMsgsEnqueued()` Gets the value of 'numMsgsEnqueued'.
`long`	`getNumMsgsFlushedAsync()` Gets the value of 'numMsgsFlushedAsync'.
`long`	`getNumMsgsFlushedSync()` Gets the value of 'numMsgsFlushedSync'.
`long`	`getNumMsgsInBatchesRcvd()` Gets the value of 'numMsgsInBatchesRcvd'.
`long`	`getNumMsgsRcvd()` Gets the value of 'numMsgsRcvd'.
`long`	`getNumMsgsSent()` Gets the value of 'numMsgsSent'.
`long`	`getNumPacketsRcvd()` Gets the value of 'numPacketsRcvd'.
`long`	`getNumPartialRollbacks()` Gets the value of 'numPartialRollbacks'.
`long`	`getNumRollbacks()` Gets the value of 'numRollbacks'.
`long`	`getNumStabilityBatchesRcvd()` Gets the value of 'numStabilityBatchesRcvd'.
`long`	`getNumStabilityInBatchesRcvd()` Gets the value of 'numStabilityInBatchesRcvd'.
`long`	`getNumStabilityRcvd()` Gets the value of 'numStabilityRcvd'.
`SrvMonIntSeries`	`getOriginToReceiveLatencies()` Gets the value of 'originToReceiveLatencies'.
`void`	`getOriginToReceiveLatenciesTo(SrvMonIntSeries val)` Copies the value of SrvMonIntSeries into the provided value.
`SrvMonIntSeries`	`getSendToPollLatencies()` Gets the value of 'sendToPollLatencies'.
`void`	`getSendToPollLatenciesTo(SrvMonIntSeries val)` Copies the value of SrvMonIntSeries into the provided value.
`SrvMonIntSeries`	`getSendToSerializeLatencies()` Gets the value of 'sendToSerializeLatencies'.
`void`	`getSendToSerializeLatenciesTo(SrvMonIntSeries val)` Copies the value of SrvMonIntSeries into the provided value.
`SrvMonIntSeries`	`getSerializeLatencies()` Gets the value of 'serializeLatencies'.
`void`	`getSerializeLatenciesTo(SrvMonIntSeries val)` Copies the value of SrvMonIntSeries into the provided value.
`SrvMonIntSeries`	`getSerializeToWireLatencies()` Gets the value of 'serializeToWireLatencies'.
`void`	`getSerializeToWireLatenciesTo(SrvMonIntSeries val)` Copies the value of SrvMonIntSeries into the provided value.
`SrvMonIntSeries`	`getWireLatencies()` Gets the value of 'wireLatencies'.
`void`	`getWireLatenciesTo(SrvMonIntSeries val)` Copies the value of SrvMonIntSeries into the provided value.
`SrvMonIntSeries`	`getWireSendLatencies()` Gets the value of 'wireSendLatencies'.
`void`	`getWireSendLatenciesTo(SrvMonIntSeries val)` Copies the value of SrvMonIntSeries into the provided value.
`SrvMonIntSeries`	`getWireToDeserializeLatencies()` Gets the value of 'wireToDeserializeLatencies'.
`void`	`getWireToDeserializeLatenciesTo(SrvMonIntSeries val)` Copies the value of SrvMonIntSeries into the provided value.
`SrvMonIntSeries`	`getWireToWireLatencies()` Gets the value of 'wireToWireLatencies'.
`void`	`getWireToWireLatenciesTo(SrvMonIntSeries val)` Copies the value of SrvMonIntSeries into the provided value.
`boolean`	`hasBusBindingName()` Checks for the presence of 'busBindingName'.
`boolean`	`hasCreateToSendLatencies()` Checks for the presence of 'createToSendLatencies'.
`boolean`	`hasDeserializeLatencies()` Checks for the presence of 'deserializeLatencies'.
`boolean`	`hasDeserializeToReceiveLatencies()` Checks for the presence of 'deserializeToReceiveLatencies'.
`boolean`	`hasDetachedCommit()` Checks for the presence of 'detachedCommit'.
`boolean`	`hasDisruptorStats()` Checks for the presence of 'disruptorStats'.
`boolean`	`hasInternal()` Checks for the presence of 'internal'.
`boolean`	`hasNumAcksSent()` Checks for the presence of 'numAcksSent'.
`boolean`	`hasNumAsyncFlushCompletions()` Checks for the presence of 'numAsyncFlushCompletions'.
`boolean`	`hasNumBindingFailures()` Checks for the presence of 'numBindingFailures'.
`boolean`	`hasNumChannelsUp()` Checks for the presence of 'numChannelsUp'.
`boolean`	`hasNumClients()` Checks for the presence of 'numClients'.
`boolean`	`hasNumCommits()` Checks for the presence of 'numCommits'.
`boolean`	`hasNumFlushesAsync()` Checks for the presence of 'numFlushesAsync'.
`boolean`	`hasNumFlushesSync()` Checks for the presence of 'numFlushesSync'.
`boolean`	`hasNumMsgBatchesRcvd()` Checks for the presence of 'numMsgBatchesRcvd'.
`boolean`	`hasNumMsgsEnqueued()` Checks for the presence of 'numMsgsEnqueued'.
`boolean`	`hasNumMsgsFlushedAsync()` Checks for the presence of 'numMsgsFlushedAsync'.
`boolean`	`hasNumMsgsFlushedSync()` Checks for the presence of 'numMsgsFlushedSync'.
`boolean`	`hasNumMsgsInBatchesRcvd()` Checks for the presence of 'numMsgsInBatchesRcvd'.
`boolean`	`hasNumMsgsRcvd()` Checks for the presence of 'numMsgsRcvd'.
`boolean`	`hasNumMsgsSent()` Checks for the presence of 'numMsgsSent'.
`boolean`	`hasNumPacketsRcvd()` Checks for the presence of 'numPacketsRcvd'.
`boolean`	`hasNumPartialRollbacks()` Checks for the presence of 'numPartialRollbacks'.
`boolean`	`hasNumRollbacks()` Checks for the presence of 'numRollbacks'.
`boolean`	`hasNumStabilityBatchesRcvd()` Checks for the presence of 'numStabilityBatchesRcvd'.
`boolean`	`hasNumStabilityInBatchesRcvd()` Checks for the presence of 'numStabilityInBatchesRcvd'.
`boolean`	`hasNumStabilityRcvd()` Checks for the presence of 'numStabilityRcvd'.
`boolean`	`hasOriginToReceiveLatencies()` Checks for the presence of 'originToReceiveLatencies'.
`boolean`	`hasSendToPollLatencies()` Checks for the presence of 'sendToPollLatencies'.
`boolean`	`hasSendToSerializeLatencies()` Checks for the presence of 'sendToSerializeLatencies'.
`boolean`	`hasSerializeLatencies()` Checks for the presence of 'serializeLatencies'.
`boolean`	`hasSerializeToWireLatencies()` Checks for the presence of 'serializeToWireLatencies'.
`boolean`	`hasWireLatencies()` Checks for the presence of 'wireLatencies'.
`boolean`	`hasWireSendLatencies()` Checks for the presence of 'wireSendLatencies'.
`boolean`	`hasWireToDeserializeLatencies()` Checks for the presence of 'wireToDeserializeLatencies'.
`boolean`	`hasWireToWireLatencies()` Checks for the presence of 'wireToWireLatencies'.
`void`	`lendBusBindingName(XString val)` Lends the value of 'busBindingName' to this object.
`void`	`lendCreateToSendLatencies(SrvMonIntSeries val)` 'Lends' a reference of the SrvMonIntSeries to the message for this field.
`void`	`lendDeserializeLatencies(SrvMonIntSeries val)` 'Lends' a reference of the SrvMonIntSeries to the message for this field.
`void`	`lendDeserializeToReceiveLatencies(SrvMonIntSeries val)` 'Lends' a reference of the SrvMonIntSeries to the message for this field.
`void`	`lendDisruptorStats(SrvMonDisruptorStats val)` 'Lends' a reference of the SrvMonDisruptorStats to the message for this field.
`void`	`lendOriginToReceiveLatencies(SrvMonIntSeries val)` 'Lends' a reference of the SrvMonIntSeries to the message for this field.
`void`	`lendSendToPollLatencies(SrvMonIntSeries val)` 'Lends' a reference of the SrvMonIntSeries to the message for this field.
`void`	`lendSendToSerializeLatencies(SrvMonIntSeries val)` 'Lends' a reference of the SrvMonIntSeries to the message for this field.
`void`	`lendSerializeLatencies(SrvMonIntSeries val)` 'Lends' a reference of the SrvMonIntSeries to the message for this field.
`void`	`lendSerializeToWireLatencies(SrvMonIntSeries val)` 'Lends' a reference of the SrvMonIntSeries to the message for this field.
`void`	`lendWireLatencies(SrvMonIntSeries val)` 'Lends' a reference of the SrvMonIntSeries to the message for this field.
`void`	`lendWireSendLatencies(SrvMonIntSeries val)` 'Lends' a reference of the SrvMonIntSeries to the message for this field.
`void`	`lendWireToDeserializeLatencies(SrvMonIntSeries val)` 'Lends' a reference of the SrvMonIntSeries to the message for this field.
`void`	`lendWireToWireLatencies(SrvMonIntSeries val)` 'Lends' a reference of the SrvMonIntSeries to the message for this field.
`void`	`setBusBindingName(String val)` Sets the value of 'busBindingName'.
`void`	`setBusBindingNameFrom(long val)` Sets the value of this String field to the given numeric value.
`void`	`setBusBindingNameFrom(XString val)` Copies the provided XString value into this object's 'busBindingName'.
`void`	`setCreateToSendLatencies(SrvMonIntSeries val)` Sets the value of 'createToSendLatencies'.
`void`	`setDeserializeLatencies(SrvMonIntSeries val)` Sets the value of 'deserializeLatencies'.
`void`	`setDeserializeToReceiveLatencies(SrvMonIntSeries val)` Sets the value of 'deserializeToReceiveLatencies'.
`void`	`setDetachedCommit(boolean val)` Sets the value of 'detachedCommit'.
`void`	`setDisruptorStats(SrvMonDisruptorStats val)` Sets the value of 'disruptorStats'.
`void`	`setInternal(boolean val)` Sets the value of 'internal'.
`void`	`setNumAcksSent(long val)` Sets the value of 'numAcksSent'.
`void`	`setNumAsyncFlushCompletions(long val)` Sets the value of 'numAsyncFlushCompletions'.
`void`	`setNumBindingFailures(int val)` Sets the value of 'numBindingFailures'.
`void`	`setNumChannelsUp(int val)` Sets the value of 'numChannelsUp'.
`void`	`setNumClients(int val)` Sets the value of 'numClients'.
`void`	`setNumCommits(long val)` Sets the value of 'numCommits'.
`void`	`setNumFlushesAsync(long val)` Sets the value of 'numFlushesAsync'.
`void`	`setNumFlushesSync(long val)` Sets the value of 'numFlushesSync'.
`void`	`setNumMsgBatchesRcvd(long val)` Sets the value of 'numMsgBatchesRcvd'.
`void`	`setNumMsgsEnqueued(long val)` Sets the value of 'numMsgsEnqueued'.
`void`	`setNumMsgsFlushedAsync(long val)` Sets the value of 'numMsgsFlushedAsync'.
`void`	`setNumMsgsFlushedSync(long val)` Sets the value of 'numMsgsFlushedSync'.
`void`	`setNumMsgsInBatchesRcvd(long val)` Sets the value of 'numMsgsInBatchesRcvd'.
`void`	`setNumMsgsRcvd(long val)` Sets the value of 'numMsgsRcvd'.
`void`	`setNumMsgsSent(long val)` Sets the value of 'numMsgsSent'.
`void`	`setNumPacketsRcvd(long val)` Sets the value of 'numPacketsRcvd'.
`void`	`setNumPartialRollbacks(long val)` Sets the value of 'numPartialRollbacks'.
`void`	`setNumRollbacks(long val)` Sets the value of 'numRollbacks'.
`void`	`setNumStabilityBatchesRcvd(long val)` Sets the value of 'numStabilityBatchesRcvd'.
`void`	`setNumStabilityInBatchesRcvd(long val)` Sets the value of 'numStabilityInBatchesRcvd'.
`void`	`setNumStabilityRcvd(long val)` Sets the value of 'numStabilityRcvd'.
`void`	`setOriginToReceiveLatencies(SrvMonIntSeries val)` Sets the value of 'originToReceiveLatencies'.
`void`	`setSendToPollLatencies(SrvMonIntSeries val)` Sets the value of 'sendToPollLatencies'.
`void`	`setSendToSerializeLatencies(SrvMonIntSeries val)` Sets the value of 'sendToSerializeLatencies'.
`void`	`setSerializeLatencies(SrvMonIntSeries val)` Sets the value of 'serializeLatencies'.
`void`	`setSerializeToWireLatencies(SrvMonIntSeries val)` Sets the value of 'serializeToWireLatencies'.
`void`	`setWireLatencies(SrvMonIntSeries val)` Sets the value of 'wireLatencies'.
`void`	`setWireSendLatencies(SrvMonIntSeries val)` Sets the value of 'wireSendLatencies'.
`void`	`setWireToDeserializeLatencies(SrvMonIntSeries val)` Sets the value of 'wireToDeserializeLatencies'.
`void`	`setWireToWireLatencies(SrvMonIntSeries val)` Sets the value of 'wireToWireLatencies'.
`SrvMonIntSeries`	`takeCreateToSendLatencies()` 'Takes' a reference to the createToSendLatencies field from the message.
`SrvMonIntSeries`	`takeDeserializeLatencies()` 'Takes' a reference to the deserializeLatencies field from the message.
`SrvMonIntSeries`	`takeDeserializeToReceiveLatencies()` 'Takes' a reference to the deserializeToReceiveLatencies field from the message.
`SrvMonDisruptorStats`	`takeDisruptorStats()` 'Takes' a reference to the disruptorStats field from the message.
`SrvMonIntSeries`	`takeOriginToReceiveLatencies()` 'Takes' a reference to the originToReceiveLatencies field from the message.
`SrvMonIntSeries`	`takeSendToPollLatencies()` 'Takes' a reference to the sendToPollLatencies field from the message.
`SrvMonIntSeries`	`takeSendToSerializeLatencies()` 'Takes' a reference to the sendToSerializeLatencies field from the message.
`SrvMonIntSeries`	`takeSerializeLatencies()` 'Takes' a reference to the serializeLatencies field from the message.
`SrvMonIntSeries`	`takeSerializeToWireLatencies()` 'Takes' a reference to the serializeToWireLatencies field from the message.
`SrvMonIntSeries`	`takeWireLatencies()` 'Takes' a reference to the wireLatencies field from the message.
`SrvMonIntSeries`	`takeWireSendLatencies()` 'Takes' a reference to the wireSendLatencies field from the message.
`SrvMonIntSeries`	`takeWireToDeserializeLatencies()` 'Takes' a reference to the wireToDeserializeLatencies field from the message.
`SrvMonIntSeries`	`takeWireToWireLatencies()` 'Takes' a reference to the wireToWireLatencies field from the message.

Methods inherited from interface com.neeve.rog.IRogValidatable
getValidationErrors, isValid

- Method Detail
  - setNumMsgsRcvd
```
void setNumMsgsRcvd(long val)
```
    Sets the value of 'numMsgsRcvd'.
    Field Description
    The number of messages received by the bus.
    
    Parameters:
    val - The value to set.
  - getNumMsgsRcvd
```
long getNumMsgsRcvd()
```
    Gets the value of 'numMsgsRcvd'.
    Field Description
    The number of messages received by the bus.
    
    Returns:
    The number of messages received by the bus.
  - clearNumMsgsRcvd
```
void clearNumMsgsRcvd()
```
    Clears the value of 'numMsgsRcvd'.
    Field Description
    The number of messages received by the bus.
    
    See Also:
    setNumMsgsRcvd(long)
  - hasNumMsgsRcvd
```
boolean hasNumMsgsRcvd()
```
    Checks for the presence of 'numMsgsRcvd'.
    Field Description
    The number of messages received by the bus.
    
    See Also:
    getNumMsgsRcvd()
  - setNumMsgsInBatchesRcvd
```
void setNumMsgsInBatchesRcvd(long val)
```
    Sets the value of 'numMsgsInBatchesRcvd'.
    Field Description
    The number of messages received by the bus that were part of a batch.
    
    Parameters:
    val - The value to set.
  - getNumMsgsInBatchesRcvd
```
long getNumMsgsInBatchesRcvd()
```
    Gets the value of 'numMsgsInBatchesRcvd'.
    Field Description
    The number of messages received by the bus that were part of a batch.
    
    Returns:
    The number of messages received by the bus that were part of a batch.
  - clearNumMsgsInBatchesRcvd
```
void clearNumMsgsInBatchesRcvd()
```
    Clears the value of 'numMsgsInBatchesRcvd'.
    Field Description
    The number of messages received by the bus that were part of a batch.
    
    See Also:
    setNumMsgsInBatchesRcvd(long)
  - hasNumMsgsInBatchesRcvd
```
boolean hasNumMsgsInBatchesRcvd()
```
    Checks for the presence of 'numMsgsInBatchesRcvd'.
    Field Description
    The number of messages received by the bus that were part of a batch.
    
    See Also:
    getNumMsgsInBatchesRcvd()
  - setNumMsgBatchesRcvd
```
void setNumMsgBatchesRcvd(long val)
```
    Sets the value of 'numMsgBatchesRcvd'.
    Field Description
    The number of batch messages received by the bus.
    
    Parameters:
    val - The value to set.
  - getNumMsgBatchesRcvd
```
long getNumMsgBatchesRcvd()
```
    Gets the value of 'numMsgBatchesRcvd'.
    Field Description
    The number of batch messages received by the bus.
    
    Returns:
    The number of batch messages received by the bus.
  - clearNumMsgBatchesRcvd
```
void clearNumMsgBatchesRcvd()
```
    Clears the value of 'numMsgBatchesRcvd'.
    Field Description
    The number of batch messages received by the bus.
    
    See Also:
    setNumMsgBatchesRcvd(long)
  - hasNumMsgBatchesRcvd
```
boolean hasNumMsgBatchesRcvd()
```
    Checks for the presence of 'numMsgBatchesRcvd'.
    Field Description
    The number of batch messages received by the bus.
    
    See Also:
    getNumMsgBatchesRcvd()
  - setNumMsgsEnqueued
```
void setNumMsgsEnqueued(long val)
```
    Sets the value of 'numMsgsEnqueued'.
    Field Description
    The total number of batch messages enqueued for delivery by this bus.
    
    Parameters:
    val - The value to set.
  - getNumMsgsEnqueued
```
long getNumMsgsEnqueued()
```
    Gets the value of 'numMsgsEnqueued'.
    Field Description
    The total number of batch messages enqueued for delivery by this bus.
    
    Returns:
    The total number of batch messages enqueued for delivery by this bus.
  - clearNumMsgsEnqueued
```
void clearNumMsgsEnqueued()
```
    Clears the value of 'numMsgsEnqueued'.
    Field Description
    The total number of batch messages enqueued for delivery by this bus.
    
    See Also:
    setNumMsgsEnqueued(long)
  - hasNumMsgsEnqueued
```
boolean hasNumMsgsEnqueued()
```
    Checks for the presence of 'numMsgsEnqueued'.
    Field Description
    The total number of batch messages enqueued for delivery by this bus.
    
    See Also:
    getNumMsgsEnqueued()
  - setNumMsgsSent
```
void setNumMsgsSent(long val)
```
    Sets the value of 'numMsgsSent'.
    Field Description
    The total number of batch messages enqueued message that were actually sent by the bus.
    
    Parameters:
    val - The value to set.
  - getNumMsgsSent
```
long getNumMsgsSent()
```
    Gets the value of 'numMsgsSent'.
    Field Description
    The total number of batch messages enqueued message that were actually sent by the bus.
    
    Returns:
    The total number of batch messages enqueued message that were actually sent by the bus.
  - clearNumMsgsSent
```
void clearNumMsgsSent()
```
    Clears the value of 'numMsgsSent'.
    Field Description
    The total number of batch messages enqueued message that were actually sent by the bus.
    
    See Also:
    setNumMsgsSent(long)
  - hasNumMsgsSent
```
boolean hasNumMsgsSent()
```
    Checks for the presence of 'numMsgsSent'.
    Field Description
    The total number of batch messages enqueued message that were actually sent by the bus.
    
    See Also:
    getNumMsgsSent()
  - setNumFlushesSync
```
void setNumFlushesSync(long val)
```
    Sets the value of 'numFlushesSync'.
    Field Description
    The number of times this bus has been synchronously flushed.
    
    Parameters:
    val - The value to set.
  - getNumFlushesSync
```
long getNumFlushesSync()
```
    Gets the value of 'numFlushesSync'.
    Field Description
    The number of times this bus has been synchronously flushed.
    
    Returns:
    The number of times this bus has been synchronously flushed.
  - clearNumFlushesSync
```
void clearNumFlushesSync()
```
    Clears the value of 'numFlushesSync'.
    Field Description
    The number of times this bus has been synchronously flushed.
    
    See Also:
    setNumFlushesSync(long)
  - hasNumFlushesSync
```
boolean hasNumFlushesSync()
```
    Checks for the presence of 'numFlushesSync'.
    Field Description
    The number of times this bus has been synchronously flushed.
    
    See Also:
    getNumFlushesSync()
  - setNumMsgsFlushedSync
```
void setNumMsgsFlushedSync(long val)
```
    Sets the value of 'numMsgsFlushedSync'.
    Field Description
    The number of messages flushed by synchronous flushes.
    
    Parameters:
    val - The value to set.
  - getNumMsgsFlushedSync
```
long getNumMsgsFlushedSync()
```
    Gets the value of 'numMsgsFlushedSync'.
    Field Description
    The number of messages flushed by synchronous flushes.
    
    Returns:
    The number of messages flushed by synchronous flushes.
  - clearNumMsgsFlushedSync
```
void clearNumMsgsFlushedSync()
```
    Clears the value of 'numMsgsFlushedSync'.
    Field Description
    The number of messages flushed by synchronous flushes.
    
    See Also:
    setNumMsgsFlushedSync(long)
  - hasNumMsgsFlushedSync
```
boolean hasNumMsgsFlushedSync()
```
    Checks for the presence of 'numMsgsFlushedSync'.
    Field Description
    The number of messages flushed by synchronous flushes.
    
    See Also:
    getNumMsgsFlushedSync()
  - setNumFlushesAsync
```
void setNumFlushesAsync(long val)
```
    Sets the value of 'numFlushesAsync'.
    Field Description
    The number of times this bus has been asynchronously flushed.
    
    Parameters:
    val - The value to set.
  - getNumFlushesAsync
```
long getNumFlushesAsync()
```
    Gets the value of 'numFlushesAsync'.
    Field Description
    The number of times this bus has been asynchronously flushed.
    
    Returns:
    The number of times this bus has been asynchronously flushed.
  - clearNumFlushesAsync
```
void clearNumFlushesAsync()
```
    Clears the value of 'numFlushesAsync'.
    Field Description
    The number of times this bus has been asynchronously flushed.
    
    See Also:
    setNumFlushesAsync(long)
  - hasNumFlushesAsync
```
boolean hasNumFlushesAsync()
```
    Checks for the presence of 'numFlushesAsync'.
    Field Description
    The number of times this bus has been asynchronously flushed.
    
    See Also:
    getNumFlushesAsync()
  - setNumAsyncFlushCompletions
```
void setNumAsyncFlushCompletions(long val)
```
    Sets the value of 'numAsyncFlushCompletions'.
    Field Description
    The number of asynchronous flushes for this that have completed.
    
    Parameters:
    val - The value to set.
  - getNumAsyncFlushCompletions
```
long getNumAsyncFlushCompletions()
```
    Gets the value of 'numAsyncFlushCompletions'.
    Field Description
    The number of asynchronous flushes for this that have completed.
    
    Returns:
    The number of asynchronous flushes for this that have completed.
  - clearNumAsyncFlushCompletions
```
void clearNumAsyncFlushCompletions()
```
    Clears the value of 'numAsyncFlushCompletions'.
    Field Description
    The number of asynchronous flushes for this that have completed.
    
    See Also:
    setNumAsyncFlushCompletions(long)
  - hasNumAsyncFlushCompletions
```
boolean hasNumAsyncFlushCompletions()
```
    Checks for the presence of 'numAsyncFlushCompletions'.
    Field Description
    The number of asynchronous flushes for this that have completed.
    
    See Also:
    getNumAsyncFlushCompletions()
  - setNumMsgsFlushedAsync
```
void setNumMsgsFlushedAsync(long val)
```
    Sets the value of 'numMsgsFlushedAsync'.
    Field Description
    The number of messages flushed by asynchronous flushes.
    
    Parameters:
    val - The value to set.
  - getNumMsgsFlushedAsync
```
long getNumMsgsFlushedAsync()
```
    Gets the value of 'numMsgsFlushedAsync'.
    Field Description
    The number of messages flushed by asynchronous flushes.
    
    Returns:
    The number of messages flushed by asynchronous flushes.
  - clearNumMsgsFlushedAsync
```
void clearNumMsgsFlushedAsync()
```
    Clears the value of 'numMsgsFlushedAsync'.
    Field Description
    The number of messages flushed by asynchronous flushes.
    
    See Also:
    setNumMsgsFlushedAsync(long)
  - hasNumMsgsFlushedAsync
```
boolean hasNumMsgsFlushedAsync()
```
    Checks for the presence of 'numMsgsFlushedAsync'.
    Field Description
    The number of messages flushed by asynchronous flushes.
    
    See Also:
    getNumMsgsFlushedAsync()
  - setNumStabilityRcvd
```
void setNumStabilityRcvd(long val)
```
    Sets the value of 'numStabilityRcvd'.
    Field Description
    The number of stability events (acks) received by this bus.
    
    Parameters:
    val - The value to set.
  - getNumStabilityRcvd
```
long getNumStabilityRcvd()
```
    Gets the value of 'numStabilityRcvd'.
    Field Description
    The number of stability events (acks) received by this bus.
    
    Returns:
    The number of stability events (acks) received by this bus.
  - clearNumStabilityRcvd
```
void clearNumStabilityRcvd()
```
    Clears the value of 'numStabilityRcvd'.
    Field Description
    The number of stability events (acks) received by this bus.
    
    See Also:
    setNumStabilityRcvd(long)
  - hasNumStabilityRcvd
```
boolean hasNumStabilityRcvd()
```
    Checks for the presence of 'numStabilityRcvd'.
    Field Description
    The number of stability events (acks) received by this bus.
    
    See Also:
    getNumStabilityRcvd()
  - setNumStabilityInBatchesRcvd
```
void setNumStabilityInBatchesRcvd(long val)
```
    Sets the value of 'numStabilityInBatchesRcvd'.
    Field Description
    The number of stability events received by this bus that were part of a stability batch.
    
    Parameters:
    val - The value to set.
  - getNumStabilityInBatchesRcvd
```
long getNumStabilityInBatchesRcvd()
```
    Gets the value of 'numStabilityInBatchesRcvd'.
    Field Description
    The number of stability events received by this bus that were part of a stability batch.
    
    Returns:
    The number of stability events received by this bus that were part of a stability batch.
  - clearNumStabilityInBatchesRcvd
```
void clearNumStabilityInBatchesRcvd()
```
    Clears the value of 'numStabilityInBatchesRcvd'.
    Field Description
    The number of stability events received by this bus that were part of a stability batch.
    
    See Also:
    setNumStabilityInBatchesRcvd(long)
  - hasNumStabilityInBatchesRcvd
```
boolean hasNumStabilityInBatchesRcvd()
```
    Checks for the presence of 'numStabilityInBatchesRcvd'.
    Field Description
    The number of stability events received by this bus that were part of a stability batch.
    
    See Also:
    getNumStabilityInBatchesRcvd()
  - setNumStabilityBatchesRcvd
```
void setNumStabilityBatchesRcvd(long val)
```
    Sets the value of 'numStabilityBatchesRcvd'.
    Field Description
    The number of batched stability events received by this bus.
    
    Parameters:
    val - The value to set.
  - getNumStabilityBatchesRcvd
```
long getNumStabilityBatchesRcvd()
```
    Gets the value of 'numStabilityBatchesRcvd'.
    Field Description
    The number of batched stability events received by this bus.
    
    Returns:
    The number of batched stability events received by this bus.
  - clearNumStabilityBatchesRcvd
```
void clearNumStabilityBatchesRcvd()
```
    Clears the value of 'numStabilityBatchesRcvd'.
    Field Description
    The number of batched stability events received by this bus.
    
    See Also:
    setNumStabilityBatchesRcvd(long)
  - hasNumStabilityBatchesRcvd
```
boolean hasNumStabilityBatchesRcvd()
```
    Checks for the presence of 'numStabilityBatchesRcvd'.
    Field Description
    The number of batched stability events received by this bus.
    
    See Also:
    getNumStabilityBatchesRcvd()
  - setNumPacketsRcvd
```
void setNumPacketsRcvd(long val)
```
    Sets the value of 'numPacketsRcvd'.
    Field Description
    The number of raw packets received by the bus.
    
    Parameters:
    val - The value to set.
  - getNumPacketsRcvd
```
long getNumPacketsRcvd()
```
    Gets the value of 'numPacketsRcvd'.
    Field Description
    The number of raw packets received by the bus.
    
    Returns:
    The number of raw packets received by the bus.
  - clearNumPacketsRcvd
```
void clearNumPacketsRcvd()
```
    Clears the value of 'numPacketsRcvd'.
    Field Description
    The number of raw packets received by the bus.
    
    See Also:
    setNumPacketsRcvd(long)
  - hasNumPacketsRcvd
```
boolean hasNumPacketsRcvd()
```
    Checks for the presence of 'numPacketsRcvd'.
    Field Description
    The number of raw packets received by the bus.
    
    See Also:
    getNumPacketsRcvd()
  - setNumCommits
```
void setNumCommits(long val)
```
    Sets the value of 'numCommits'.
    Field Description
    The number transactions committed by the bus.
    
    Parameters:
    val - The value to set.
  - getNumCommits
```
long getNumCommits()
```
    Gets the value of 'numCommits'.
    Field Description
    The number transactions committed by the bus.
    
    Returns:
    The number transactions committed by the bus.
  - clearNumCommits
```
void clearNumCommits()
```
    Clears the value of 'numCommits'.
    Field Description
    The number transactions committed by the bus.
    
    See Also:
    setNumCommits(long)
  - hasNumCommits
```
boolean hasNumCommits()
```
    Checks for the presence of 'numCommits'.
    Field Description
    The number transactions committed by the bus.
    
    See Also:
    getNumCommits()
  - setNumRollbacks
```
void setNumRollbacks(long val)
```
    Sets the value of 'numRollbacks'.
    Field Description
    The number transactions rolled back for the bus.
    
    Parameters:
    val - The value to set.
  - getNumRollbacks
```
long getNumRollbacks()
```
    Gets the value of 'numRollbacks'.
    Field Description
    The number transactions rolled back for the bus.
    
    Returns:
    The number transactions rolled back for the bus.
  - clearNumRollbacks
```
void clearNumRollbacks()
```
    Clears the value of 'numRollbacks'.
    Field Description
    The number transactions rolled back for the bus.
    
    See Also:
    setNumRollbacks(long)
  - hasNumRollbacks
```
boolean hasNumRollbacks()
```
    Checks for the presence of 'numRollbacks'.
    Field Description
    The number transactions rolled back for the bus.
    
    See Also:
    getNumRollbacks()
  - setNumClients
```
void setNumClients(int val)
```
    Sets the value of 'numClients'.
    Field Description
    The number of connected clients (if applicable).
    
    Parameters:
    val - The value to set.
  - getNumClients
```
int getNumClients()
```
    Gets the value of 'numClients'.
    Field Description
    The number of connected clients (if applicable).
    
    Returns:
    The number of connected clients (if applicable).
  - clearNumClients
```
void clearNumClients()
```
    Clears the value of 'numClients'.
    Field Description
    The number of connected clients (if applicable).
    
    See Also:
    setNumClients(int)
  - hasNumClients
```
boolean hasNumClients()
```
    Checks for the presence of 'numClients'.
    Field Description
    The number of connected clients (if applicable).
    
    See Also:
    getNumClients()
  - setNumChannelsUp
```
void setNumChannelsUp(int val)
```
    Sets the value of 'numChannelsUp'.
    Field Description
    The number of channels brought up by this bus.
    
    Parameters:
    val - The value to set.
  - getNumChannelsUp
```
int getNumChannelsUp()
```
    Gets the value of 'numChannelsUp'.
    Field Description
    The number of channels brought up by this bus.
    
    Returns:
    The number of channels brought up by this bus.
  - clearNumChannelsUp
```
void clearNumChannelsUp()
```
    Clears the value of 'numChannelsUp'.
    Field Description
    The number of channels brought up by this bus.
    
    See Also:
    setNumChannelsUp(int)
  - hasNumChannelsUp
```
boolean hasNumChannelsUp()
```
    Checks for the presence of 'numChannelsUp'.
    Field Description
    The number of channels brought up by this bus.
    
    See Also:
    getNumChannelsUp()
  - setNumBindingFailures
```
void setNumBindingFailures(int val)
```
    Sets the value of 'numBindingFailures'.
    Field Description
    The number of binding failures that have occurred for this bus.
    
    Parameters:
    val - The value to set.
  - getNumBindingFailures
```
int getNumBindingFailures()
```
    Gets the value of 'numBindingFailures'.
    Field Description
    The number of binding failures that have occurred for this bus.
    
    Returns:
    The number of binding failures that have occurred for this bus.
  - clearNumBindingFailures
```
void clearNumBindingFailures()
```
    Clears the value of 'numBindingFailures'.
    Field Description
    The number of binding failures that have occurred for this bus.
    
    See Also:
    setNumBindingFailures(int)
  - hasNumBindingFailures
```
boolean hasNumBindingFailures()
```
    Checks for the presence of 'numBindingFailures'.
    Field Description
    The number of binding failures that have occurred for this bus.
    
    See Also:
    getNumBindingFailures()
  - setDetachedCommit
```
void setDetachedCommit(boolean val)
```
    Sets the value of 'detachedCommit'.
    Field Description
    If the bus binding is operating in detached mode.
    
    Parameters:
    val - The value to set.
  - getDetachedCommit
```
boolean getDetachedCommit()
```
    Gets the value of 'detachedCommit'.
    Field Description
    If the bus binding is operating in detached mode.
    
    Returns:
    If the bus binding is operating in detached mode.
  - clearDetachedCommit
```
void clearDetachedCommit()
```
    Clears the value of 'detachedCommit'.
    Field Description
    If the bus binding is operating in detached mode.
    
    See Also:
    setDetachedCommit(boolean)
  - hasDetachedCommit
```
boolean hasDetachedCommit()
```
    Checks for the presence of 'detachedCommit'.
    Field Description
    If the bus binding is operating in detached mode.
    
    See Also:
    getDetachedCommit()
  - setInternal
```
void setInternal(boolean val)
```
    Sets the value of 'internal'.
    Field Description
    Indicates if this is an internal bus.
    
    Parameters:
    val - The value to set.
  - getInternal
```
boolean getInternal()
```
    Gets the value of 'internal'.
    Field Description
    Indicates if this is an internal bus.
    
    Returns:
    Indicates if this is an internal bus.
  - clearInternal
```
void clearInternal()
```
    Clears the value of 'internal'.
    Field Description
    Indicates if this is an internal bus.
    
    See Also:
    setInternal(boolean)
  - hasInternal
```
boolean hasInternal()
```
    Checks for the presence of 'internal'.
    Field Description
    Indicates if this is an internal bus.
    
    See Also:
    getInternal()
  - setNumAcksSent
```
void setNumAcksSent(long val)
```
    Sets the value of 'numAcksSent'.
    Field Description
    The number of inbound messages acknowledged by the bus.
    
    Parameters:
    val - The value to set.
  - getNumAcksSent
```
long getNumAcksSent()
```
    Gets the value of 'numAcksSent'.
    Field Description
    The number of inbound messages acknowledged by the bus.
    
    Returns:
    The number of inbound messages acknowledged by the bus.
  - clearNumAcksSent
```
void clearNumAcksSent()
```
    Clears the value of 'numAcksSent'.
    Field Description
    The number of inbound messages acknowledged by the bus.
    
    See Also:
    setNumAcksSent(long)
  - hasNumAcksSent
```
boolean hasNumAcksSent()
```
    Checks for the presence of 'numAcksSent'.
    Field Description
    The number of inbound messages acknowledged by the bus.
    
    See Also:
    getNumAcksSent()
  - setNumPartialRollbacks
```
void setNumPartialRollbacks(long val)
```
    Sets the value of 'numPartialRollbacks'.
    Field Description
    The number of partial (savepoint) transaction roll back for the bus.
    
    Parameters:
    val - The value to set.
  - getNumPartialRollbacks
```
long getNumPartialRollbacks()
```
    Gets the value of 'numPartialRollbacks'.
    Field Description
    The number of partial (savepoint) transaction roll back for the bus.
    
    Returns:
    The number of partial (savepoint) transaction roll back for the bus.
  - clearNumPartialRollbacks
```
void clearNumPartialRollbacks()
```
    Clears the value of 'numPartialRollbacks'.
    Field Description
    The number of partial (savepoint) transaction roll back for the bus.
    
    See Also:
    setNumPartialRollbacks(long)
  - hasNumPartialRollbacks
```
boolean hasNumPartialRollbacks()
```
    Checks for the presence of 'numPartialRollbacks'.
    Field Description
    The number of partial (savepoint) transaction roll back for the bus.
    
    See Also:
    getNumPartialRollbacks()
  - setBusBindingName
```
void setBusBindingName(String val)
```
    Sets the value of 'busBindingName'.
    Field Description
    The name of the bus.
    
    Parameters:
    val - The value to set.
  - getBusBindingName
```
String getBusBindingName()
```
    Gets the value of 'busBindingName'.
    Field Description
    The name of the bus.
    
    Returns:
    The name of the bus.
  - lendBusBindingName
```
void lendBusBindingName(XString val)
```
    Lends the value of 'busBindingName' to this object.
    This method is equivalent to setBusBindingName except that it allows this object to defer copying the value until this object is next serialized. This means that the caller must not modify or dispose the value being passed in to this method.
    Field Description
    The name of the bus.
    Usage Notes
    Note that implementations of this method are not strictly required to defer copying the value, this method only provides the hint to this object that it may defer copy. The caller must ensure that the value value is immutable and not disposed regardless.
    Note, also, that unlike lendXXX methods for embedded entities, this method does not attempt to acquire or dispose of the value passed in even if the value is poolable.
    
    Parameters:
    val - The value to set.
    
    Throws:
    
    IllegalArgumentException - If the value is mutable.
  - setBusBindingNameFrom
```
void setBusBindingNameFrom(long val)
```
    Sets the value of this String field to the given numeric value.
    Field Description
    The name of the bus.
    NOTE:
    This is the same as calling setBusBindingName(String). with Long.valueOf(val).toString(), except that using this method is a zero garbage operation for Xbuf encoding.
  - getBusBindingNameTo
```
<T extends XString> T getBusBindingNameTo(XString.Factory<T> factory)
```
    Copies the value of this String field into a new XString from the given factory.
    Field Description
    The name of the bus.
    If the value of this field is not null this method creates an XString from the provided Factory, copies this field's value into the type, and returns the new XString.);
    This is a zero garbage operation if the provided factory is backed by a pool and the pool; has available instances;
    
    Parameters:
    factory - The factory from which to get the XString to copy into and return
    
    Returns:
    a new XString from the provided factory if this field is set or null.
    
    Throws:
    
    NullPointerException - if the provided factory is null
  - setBusBindingNameFrom
```
void setBusBindingNameFrom(XString val)
```
    Copies the provided XString value into this object's 'busBindingName'.
    Field Description
    The name of the bus.
    NOTE:
    This is a Zero Garbage operation for XBuf encoded objects. Additionally, this setter can be more efficient than setBusBindingName(String) because it avoids encoding the value into a String if the given XString is already encoded.
  - getBusBindingNameTo
```
void getBusBindingNameTo(XString val)
```
    Copies the value of 'busBindingName' into the provided XString.
    Field Description
    The name of the bus.
    NOTE:
    This is a Zero Garbage operation for XBuf encoded objects. Additionally, this getter can be more efficient than getBusBindingName() bec because it can avoid decoding the value into an String.
    
    See Also:
    getBusBindingName()
  - getBusBindingNameUnsafe
```
XString getBusBindingNameUnsafe()
```
    Gets the raw value of 'busBindingName'.
    Field Description
    The name of the bus.
    NOTE:
    This method retrieves the raw value backed by this object's buffer. This is a useful operation when copying this field value to another object because it avoids copying the data into an intermediate XString and instead allows direct byte transfer from the raw value to the target object.
    However, this accessor is inherently unsafe because the buffer backing this object can be changed which would consequently invalidate the XString returned by this method. Consequently, the caller must not retain the returned raw value beyond the scope of this object's lifespan and access to the raw value follows the same threading rules as access to this object.
    Additionally, the caller must not in any way mutate or modify the returned value as doing so could corrupt this object's backing buffer.
    
    Returns:
    the field's raw value
    See Also:
    getBusBindingName()
  - clearBusBindingName
```
void clearBusBindingName()
```
    Clears the value of 'busBindingName'.
    Field Description
    The name of the bus.
    
    See Also:
    setBusBindingName(String)
  - hasBusBindingName
```
boolean hasBusBindingName()
```
    Checks for the presence of 'busBindingName'.
    Field Description
    The name of the bus.
    
    See Also:
    getBusBindingName()
  - setCreateToSendLatencies
```
void setCreateToSendLatencies(SrvMonIntSeries val)
```
    Sets the value of 'createToSendLatencies'.
    Field Description
    The create to send latencies in microseconds, the time in microseconds from message creation to when send was called for it (aka 'c2o').
    
    Parameters:
    val - The value to set.
  - lendCreateToSendLatencies
```
void lendCreateToSendLatencies(SrvMonIntSeries val)
```
    'Lends' a reference of the SrvMonIntSeries to the message for this field.
    Field Description
    The create to send latencies in microseconds, the time in microseconds from message creation to when send was called for it (aka 'c2o').
    NOTE:
    It is illegal to hold onto an entity 'set' on a message post the disposal of the container message. This is true even if a reference to the entity is explicitly 'acquired' by the application via acquire().
    To hold onto the reference of an entity beyond the lifecycle of its container message, an application must own a reference to the entity (via, for example, 'taking' the entity off an inbound message) and then 'lend' the entity to the message for sending. The act of 'lending' an entity to a message implies that the application continues to own the entity even though the message is holding a reference to it for the duration of the send.
    
    Parameters:
    val - the value to 'lend' to lend.
  - getCreateToSendLatencies
```
SrvMonIntSeries getCreateToSendLatencies()
```
    Gets the value of 'createToSendLatencies'.
    Field Description
    The create to send latencies in microseconds, the time in microseconds from message creation to when send was called for it (aka 'c2o').
    
    Returns:
    The create to send latencies in microseconds, the time in microseconds from message creation to when send was called for it (aka 'c2o').
  - getCreateToSendLatenciesTo
```
void getCreateToSendLatenciesTo(SrvMonIntSeries val)
```
    Copies the value of SrvMonIntSeries into the provided value.
    IF the value is not set, then the contents of the provided SrvMonIntSeries are cleared.
    
    Parameters:
    val - the value to copy into
    See Also:
    SrvMonIntSeries.copyInto(SrvMonIntSeries)
  - takeCreateToSendLatencies
```
SrvMonIntSeries takeCreateToSendLatencies()
```
    'Takes' a reference to the createToSendLatencies field from the message.
    Field Description
    The create to send latencies in microseconds, the time in microseconds from message creation to when send was called for it (aka 'c2o').
    NOTE:
    A nested entity reference returned by getXXX() is only valid until the entity is disposed i.e. the act of getting an entity does not transfer ownership of the entity to the application A message disposes of its reference to its contained entities when it is disposed itself.
    An AEP engine disposes a message on return from its message handler. Therefore, applications working with AEP engines that wish to hold onto a nested entity reference post return from its containing message's handler must either acquire a reference to the container message or 'take' the nested entity itself from the container message. The act of 'taking' an entity differs from 'getting' an entity in that 'take' does what is necessary to ensure that the entity contents are not cleared and the entity not disposed when the message itself is disposed. For a taken entity to be disposed, the application must explicitly dispose it when done working with it.
    
    Returns:
    a 'taken' reference to the field or null if the field is not set.
  - hasCreateToSendLatencies
```
boolean hasCreateToSendLatencies()
```
    Checks for the presence of 'createToSendLatencies'.
    Field Description
    The create to send latencies in microseconds, the time in microseconds from message creation to when send was called for it (aka 'c2o').
    
    See Also:
    getCreateToSendLatencies()
  - clearCreateToSendLatencies
```
void clearCreateToSendLatencies()
```
    Clears the value of 'createToSendLatencies'.
    Field Description
    The create to send latencies in microseconds, the time in microseconds from message creation to when send was called for it (aka 'c2o').
    
    See Also:
    setCreateToSendLatencies(SrvMonIntSeries)
  - setSendToSerializeLatencies
```
void setSendToSerializeLatencies(SrvMonIntSeries val)
```
    Sets the value of 'sendToSerializeLatencies'.
    Field Description
    The send to serialize latencies in microseconds, the time from when the message send is started until it was serialized in preparation for transmission on the wire (aka: 'o2s').
    Note that this time excludes o2p for the case where the binding is operating in detached mode.
    
    Parameters:
    val - The value to set.
  - lendSendToSerializeLatencies
```
void lendSendToSerializeLatencies(SrvMonIntSeries val)
```
    'Lends' a reference of the SrvMonIntSeries to the message for this field.
    Field Description
    The send to serialize latencies in microseconds, the time from when the message send is started until it was serialized in preparation for transmission on the wire (aka: 'o2s').
    Note that this time excludes o2p for the case where the binding is operating in detached mode.
    NOTE:
    It is illegal to hold onto an entity 'set' on a message post the disposal of the container message. This is true even if a reference to the entity is explicitly 'acquired' by the application via acquire().
    To hold onto the reference of an entity beyond the lifecycle of its container message, an application must own a reference to the entity (via, for example, 'taking' the entity off an inbound message) and then 'lend' the entity to the message for sending. The act of 'lending' an entity to a message implies that the application continues to own the entity even though the message is holding a reference to it for the duration of the send.
    
    Parameters:
    val - the value to 'lend' to lend.
  - getSendToSerializeLatencies
```
SrvMonIntSeries getSendToSerializeLatencies()
```
    Gets the value of 'sendToSerializeLatencies'.
    Field Description
    The send to serialize latencies in microseconds, the time from when the message send is started until it was serialized in preparation for transmission on the wire (aka: 'o2s').
    Note that this time excludes o2p for the case where the binding is operating in detached mode.
    
    Returns:
    The send to serialize latencies in microseconds, the time from when the message send is started until it was serialized in preparation for transmission on the wire (aka: 'o2s').
  - getSendToSerializeLatenciesTo
```
void getSendToSerializeLatenciesTo(SrvMonIntSeries val)
```
    Copies the value of SrvMonIntSeries into the provided value.
    IF the value is not set, then the contents of the provided SrvMonIntSeries are cleared.
    
    Parameters:
    val - the value to copy into
    See Also:
    SrvMonIntSeries.copyInto(SrvMonIntSeries)
  - takeSendToSerializeLatencies
```
SrvMonIntSeries takeSendToSerializeLatencies()
```
    'Takes' a reference to the sendToSerializeLatencies field from the message.
    Field Description
    The send to serialize latencies in microseconds, the time from when the message send is started until it was serialized in preparation for transmission on the wire (aka: 'o2s').
    Note that this time excludes o2p for the case where the binding is operating in detached mode.
    NOTE:
    A nested entity reference returned by getXXX() is only valid until the entity is disposed i.e. the act of getting an entity does not transfer ownership of the entity to the application A message disposes of its reference to its contained entities when it is disposed itself.
    An AEP engine disposes a message on return from its message handler. Therefore, applications working with AEP engines that wish to hold onto a nested entity reference post return from its containing message's handler must either acquire a reference to the container message or 'take' the nested entity itself from the container message. The act of 'taking' an entity differs from 'getting' an entity in that 'take' does what is necessary to ensure that the entity contents are not cleared and the entity not disposed when the message itself is disposed. For a taken entity to be disposed, the application must explicitly dispose it when done working with it.
    
    Returns:
    a 'taken' reference to the field or null if the field is not set.
  - hasSendToSerializeLatencies
```
boolean hasSendToSerializeLatencies()
```
    Checks for the presence of 'sendToSerializeLatencies'.
    Field Description
    The send to serialize latencies in microseconds, the time from when the message send is started until it was serialized in preparation for transmission on the wire (aka: 'o2s').
    Note that this time excludes o2p for the case where the binding is operating in detached mode.
    
    See Also:
    getSendToSerializeLatencies()
  - clearSendToSerializeLatencies
```
void clearSendToSerializeLatencies()
```
    Clears the value of 'sendToSerializeLatencies'.
    Field Description
    The send to serialize latencies in microseconds, the time from when the message send is started until it was serialized in preparation for transmission on the wire (aka: 'o2s').
    Note that this time excludes o2p for the case where the binding is operating in detached mode.
    
    See Also:
    setSendToSerializeLatencies(SrvMonIntSeries)
  - setSerializeLatencies
```
void setSerializeLatencies(SrvMonIntSeries val)
```
    Sets the value of 'serializeLatencies'.
    Field Description
    The serialize latencies in microseconds, the spent serializing the MessageView to its transport encoding (aka: 's').
    
    Parameters:
    val - The value to set.
  - lendSerializeLatencies
```
void lendSerializeLatencies(SrvMonIntSeries val)
```
    'Lends' a reference of the SrvMonIntSeries to the message for this field.
    Field Description
    The serialize latencies in microseconds, the spent serializing the MessageView to its transport encoding (aka: 's').
    NOTE:
    It is illegal to hold onto an entity 'set' on a message post the disposal of the container message. This is true even if a reference to the entity is explicitly 'acquired' by the application via acquire().
    To hold onto the reference of an entity beyond the lifecycle of its container message, an application must own a reference to the entity (via, for example, 'taking' the entity off an inbound message) and then 'lend' the entity to the message for sending. The act of 'lending' an entity to a message implies that the application continues to own the entity even though the message is holding a reference to it for the duration of the send.
    
    Parameters:
    val - the value to 'lend' to lend.
  - getSerializeLatencies
```
SrvMonIntSeries getSerializeLatencies()
```
    Gets the value of 'serializeLatencies'.
    Field Description
    The serialize latencies in microseconds, the spent serializing the MessageView to its transport encoding (aka: 's').
    
    Returns:
    The serialize latencies in microseconds, the spent serializing the MessageView to its transport encoding (aka: 's').
  - getSerializeLatenciesTo
```
void getSerializeLatenciesTo(SrvMonIntSeries val)
```
    Copies the value of SrvMonIntSeries into the provided value.
    IF the value is not set, then the contents of the provided SrvMonIntSeries are cleared.
    
    Parameters:
    val - the value to copy into
    See Also:
    SrvMonIntSeries.copyInto(SrvMonIntSeries)
  - takeSerializeLatencies
```
SrvMonIntSeries takeSerializeLatencies()
```
    'Takes' a reference to the serializeLatencies field from the message.
    Field Description
    The serialize latencies in microseconds, the spent serializing the MessageView to its transport encoding (aka: 's').
    NOTE:
    A nested entity reference returned by getXXX() is only valid until the entity is disposed i.e. the act of getting an entity does not transfer ownership of the entity to the application A message disposes of its reference to its contained entities when it is disposed itself.
    An AEP engine disposes a message on return from its message handler. Therefore, applications working with AEP engines that wish to hold onto a nested entity reference post return from its containing message's handler must either acquire a reference to the container message or 'take' the nested entity itself from the container message. The act of 'taking' an entity differs from 'getting' an entity in that 'take' does what is necessary to ensure that the entity contents are not cleared and the entity not disposed when the message itself is disposed. For a taken entity to be disposed, the application must explicitly dispose it when done working with it.
    
    Returns:
    a 'taken' reference to the field or null if the field is not set.
  - hasSerializeLatencies
```
boolean hasSerializeLatencies()
```
    Checks for the presence of 'serializeLatencies'.
    Field Description
    The serialize latencies in microseconds, the spent serializing the MessageView to its transport encoding (aka: 's').
    
    See Also:
    getSerializeLatencies()
  - clearSerializeLatencies
```
void clearSerializeLatencies()
```
    Clears the value of 'serializeLatencies'.
    Field Description
    The serialize latencies in microseconds, the spent serializing the MessageView to its transport encoding (aka: 's').
    
    See Also:
    setSerializeLatencies(SrvMonIntSeries)
  - setSerializeToWireLatencies
```
void setSerializeToWireLatencies(SrvMonIntSeries val)
```
    Sets the value of 'serializeToWireLatencies'.
    Field Description
    The serialize to wire latencies in microseconds, the time post deserialize to when just before the message is written to the wire (aka: 's2w').
    
    Parameters:
    val - The value to set.
  - lendSerializeToWireLatencies
```
void lendSerializeToWireLatencies(SrvMonIntSeries val)
```
    'Lends' a reference of the SrvMonIntSeries to the message for this field.
    Field Description
    The serialize to wire latencies in microseconds, the time post deserialize to when just before the message is written to the wire (aka: 's2w').
    NOTE:
    It is illegal to hold onto an entity 'set' on a message post the disposal of the container message. This is true even if a reference to the entity is explicitly 'acquired' by the application via acquire().
    To hold onto the reference of an entity beyond the lifecycle of its container message, an application must own a reference to the entity (via, for example, 'taking' the entity off an inbound message) and then 'lend' the entity to the message for sending. The act of 'lending' an entity to a message implies that the application continues to own the entity even though the message is holding a reference to it for the duration of the send.
    
    Parameters:
    val - the value to 'lend' to lend.
  - getSerializeToWireLatencies
```
SrvMonIntSeries getSerializeToWireLatencies()
```
    Gets the value of 'serializeToWireLatencies'.
    Field Description
    The serialize to wire latencies in microseconds, the time post deserialize to when just before the message is written to the wire (aka: 's2w').
    
    Returns:
    The serialize to wire latencies in microseconds, the time post deserialize to when just before the message is written to the wire (aka: 's2w').
  - getSerializeToWireLatenciesTo
```
void getSerializeToWireLatenciesTo(SrvMonIntSeries val)
```
    Copies the value of SrvMonIntSeries into the provided value.
    IF the value is not set, then the contents of the provided SrvMonIntSeries are cleared.
    
    Parameters:
    val - the value to copy into
    See Also:
    SrvMonIntSeries.copyInto(SrvMonIntSeries)
  - takeSerializeToWireLatencies
```
SrvMonIntSeries takeSerializeToWireLatencies()
```
    'Takes' a reference to the serializeToWireLatencies field from the message.
    Field Description
    The serialize to wire latencies in microseconds, the time post deserialize to when just before the message is written to the wire (aka: 's2w').
    NOTE:
    A nested entity reference returned by getXXX() is only valid until the entity is disposed i.e. the act of getting an entity does not transfer ownership of the entity to the application A message disposes of its reference to its contained entities when it is disposed itself.
    An AEP engine disposes a message on return from its message handler. Therefore, applications working with AEP engines that wish to hold onto a nested entity reference post return from its containing message's handler must either acquire a reference to the container message or 'take' the nested entity itself from the container message. The act of 'taking' an entity differs from 'getting' an entity in that 'take' does what is necessary to ensure that the entity contents are not cleared and the entity not disposed when the message itself is disposed. For a taken entity to be disposed, the application must explicitly dispose it when done working with it.
    
    Returns:
    a 'taken' reference to the field or null if the field is not set.
  - hasSerializeToWireLatencies
```
boolean hasSerializeToWireLatencies()
```
    Checks for the presence of 'serializeToWireLatencies'.
    Field Description
    The serialize to wire latencies in microseconds, the time post deserialize to when just before the message is written to the wire (aka: 's2w').
    
    See Also:
    getSerializeToWireLatencies()
  - clearSerializeToWireLatencies
```
void clearSerializeToWireLatencies()
```
    Clears the value of 'serializeToWireLatencies'.
    Field Description
    The serialize to wire latencies in microseconds, the time post deserialize to when just before the message is written to the wire (aka: 's2w').
    
    See Also:
    setSerializeToWireLatencies(SrvMonIntSeries)
  - setWireLatencies
```
void setWireLatencies(SrvMonIntSeries val)
```
    Sets the value of 'wireLatencies'.
    Field Description
    The wire latencies in microseconds, the time an inbound message spent on the wire (aka: 'w').
    The time spent on the wire from when the message was written to the wire by the sender to the time it was received off the wire by the receiver. Note: that this metric is subject to clock skew when the sending and receivin sides are on different hosts.
    
    Parameters:
    val - The value to set.
  - lendWireLatencies
```
void lendWireLatencies(SrvMonIntSeries val)
```
    'Lends' a reference of the SrvMonIntSeries to the message for this field.
    Field Description
    The wire latencies in microseconds, the time an inbound message spent on the wire (aka: 'w').
    The time spent on the wire from when the message was written to the wire by the sender to the time it was received off the wire by the receiver. Note: that this metric is subject to clock skew when the sending and receivin sides are on different hosts.
    NOTE:
    It is illegal to hold onto an entity 'set' on a message post the disposal of the container message. This is true even if a reference to the entity is explicitly 'acquired' by the application via acquire().
    To hold onto the reference of an entity beyond the lifecycle of its container message, an application must own a reference to the entity (via, for example, 'taking' the entity off an inbound message) and then 'lend' the entity to the message for sending. The act of 'lending' an entity to a message implies that the application continues to own the entity even though the message is holding a reference to it for the duration of the send.
    
    Parameters:
    val - the value to 'lend' to lend.
  - getWireLatencies
```
SrvMonIntSeries getWireLatencies()
```
    Gets the value of 'wireLatencies'.
    Field Description
    The wire latencies in microseconds, the time an inbound message spent on the wire (aka: 'w').
    The time spent on the wire from when the message was written to the wire by the sender to the time it was received off the wire by the receiver. Note: that this metric is subject to clock skew when the sending and receivin sides are on different hosts.
    
    Returns:
    The wire latencies in microseconds, the time an inbound message spent on the wire (aka: 'w').
  - getWireLatenciesTo
```
void getWireLatenciesTo(SrvMonIntSeries val)
```
    Copies the value of SrvMonIntSeries into the provided value.
    IF the value is not set, then the contents of the provided SrvMonIntSeries are cleared.
    
    Parameters:
    val - the value to copy into
    See Also:
    SrvMonIntSeries.copyInto(SrvMonIntSeries)
  - takeWireLatencies
```
SrvMonIntSeries takeWireLatencies()
```
    'Takes' a reference to the wireLatencies field from the message.
    Field Description
    The wire latencies in microseconds, the time an inbound message spent on the wire (aka: 'w').
    The time spent on the wire from when the message was written to the wire by the sender to the time it was received off the wire by the receiver. Note: that this metric is subject to clock skew when the sending and receivin sides are on different hosts.
    NOTE:
    A nested entity reference returned by getXXX() is only valid until the entity is disposed i.e. the act of getting an entity does not transfer ownership of the entity to the application A message disposes of its reference to its contained entities when it is disposed itself.
    An AEP engine disposes a message on return from its message handler. Therefore, applications working with AEP engines that wish to hold onto a nested entity reference post return from its containing message's handler must either acquire a reference to the container message or 'take' the nested entity itself from the container message. The act of 'taking' an entity differs from 'getting' an entity in that 'take' does what is necessary to ensure that the entity contents are not cleared and the entity not disposed when the message itself is disposed. For a taken entity to be disposed, the application must explicitly dispose it when done working with it.
    
    Returns:
    a 'taken' reference to the field or null if the field is not set.
  - hasWireLatencies
```
boolean hasWireLatencies()
```
    Checks for the presence of 'wireLatencies'.
    Field Description
    The wire latencies in microseconds, the time an inbound message spent on the wire (aka: 'w').
    The time spent on the wire from when the message was written to the wire by the sender to the time it was received off the wire by the receiver. Note: that this metric is subject to clock skew when the sending and receivin sides are on different hosts.
    
    See Also:
    getWireLatencies()
  - clearWireLatencies
```
void clearWireLatencies()
```
    Clears the value of 'wireLatencies'.
    Field Description
    The wire latencies in microseconds, the time an inbound message spent on the wire (aka: 'w').
    The time spent on the wire from when the message was written to the wire by the sender to the time it was received off the wire by the receiver. Note: that this metric is subject to clock skew when the sending and receivin sides are on different hosts.
    
    See Also:
    setWireLatencies(SrvMonIntSeries)
  - setWireToDeserializeLatencies
```
void setWireToDeserializeLatencies(SrvMonIntSeries val)
```
    Sets the value of 'wireToDeserializeLatencies'.
    Field Description
    The time from when the serialized form was received from the wire to deserialization (aka: 'w2d').
    
    Parameters:
    val - The value to set.
  - lendWireToDeserializeLatencies
```
void lendWireToDeserializeLatencies(SrvMonIntSeries val)
```
    'Lends' a reference of the SrvMonIntSeries to the message for this field.
    Field Description
    The time from when the serialized form was received from the wire to deserialization (aka: 'w2d').
    NOTE:
    It is illegal to hold onto an entity 'set' on a message post the disposal of the container message. This is true even if a reference to the entity is explicitly 'acquired' by the application via acquire().
    To hold onto the reference of an entity beyond the lifecycle of its container message, an application must own a reference to the entity (via, for example, 'taking' the entity off an inbound message) and then 'lend' the entity to the message for sending. The act of 'lending' an entity to a message implies that the application continues to own the entity even though the message is holding a reference to it for the duration of the send.
    
    Parameters:
    val - the value to 'lend' to lend.
  - getWireToDeserializeLatencies
```
SrvMonIntSeries getWireToDeserializeLatencies()
```
    Gets the value of 'wireToDeserializeLatencies'.
    Field Description
    The time from when the serialized form was received from the wire to deserialization (aka: 'w2d').
    
    Returns:
    The time from when the serialized form was received from the wire to deserialization (aka: 'w2d').
  - getWireToDeserializeLatenciesTo
```
void getWireToDeserializeLatenciesTo(SrvMonIntSeries val)
```
    Copies the value of SrvMonIntSeries into the provided value.
    IF the value is not set, then the contents of the provided SrvMonIntSeries are cleared.
    
    Parameters:
    val - the value to copy into
    See Also:
    SrvMonIntSeries.copyInto(SrvMonIntSeries)
  - takeWireToDeserializeLatencies
```
SrvMonIntSeries takeWireToDeserializeLatencies()
```
    'Takes' a reference to the wireToDeserializeLatencies field from the message.
    Field Description
    The time from when the serialized form was received from the wire to deserialization (aka: 'w2d').
    NOTE:
    A nested entity reference returned by getXXX() is only valid until the entity is disposed i.e. the act of getting an entity does not transfer ownership of the entity to the application A message disposes of its reference to its contained entities when it is disposed itself.
    An AEP engine disposes a message on return from its message handler. Therefore, applications working with AEP engines that wish to hold onto a nested entity reference post return from its containing message's handler must either acquire a reference to the container message or 'take' the nested entity itself from the container message. The act of 'taking' an entity differs from 'getting' an entity in that 'take' does what is necessary to ensure that the entity contents are not cleared and the entity not disposed when the message itself is disposed. For a taken entity to be disposed, the application must explicitly dispose it when done working with it.
    
    Returns:
    a 'taken' reference to the field or null if the field is not set.
  - hasWireToDeserializeLatencies
```
boolean hasWireToDeserializeLatencies()
```
    Checks for the presence of 'wireToDeserializeLatencies'.
    Field Description
    The time from when the serialized form was received from the wire to deserialization (aka: 'w2d').
    
    See Also:
    getWireToDeserializeLatencies()
  - clearWireToDeserializeLatencies
```
void clearWireToDeserializeLatencies()
```
    Clears the value of 'wireToDeserializeLatencies'.
    Field Description
    The time from when the serialized form was received from the wire to deserialization (aka: 'w2d').
    
    See Also:
    setWireToDeserializeLatencies(SrvMonIntSeries)
  - setDeserializeLatencies
```
void setDeserializeLatencies(SrvMonIntSeries val)
```
    Sets the value of 'deserializeLatencies'.
    Field Description
    The time (in microseconds) spent deserializing the message and wrapping it in a MessageView (aka: 'd').
    
    Parameters:
    val - The value to set.
  - lendDeserializeLatencies
```
void lendDeserializeLatencies(SrvMonIntSeries val)
```
    'Lends' a reference of the SrvMonIntSeries to the message for this field.
    Field Description
    The time (in microseconds) spent deserializing the message and wrapping it in a MessageView (aka: 'd').
    NOTE:
    It is illegal to hold onto an entity 'set' on a message post the disposal of the container message. This is true even if a reference to the entity is explicitly 'acquired' by the application via acquire().
    To hold onto the reference of an entity beyond the lifecycle of its container message, an application must own a reference to the entity (via, for example, 'taking' the entity off an inbound message) and then 'lend' the entity to the message for sending. The act of 'lending' an entity to a message implies that the application continues to own the entity even though the message is holding a reference to it for the duration of the send.
    
    Parameters:
    val - the value to 'lend' to lend.
  - getDeserializeLatencies
```
SrvMonIntSeries getDeserializeLatencies()
```
    Gets the value of 'deserializeLatencies'.
    Field Description
    The time (in microseconds) spent deserializing the message and wrapping it in a MessageView (aka: 'd').
    
    Returns:
    The time (in microseconds) spent deserializing the message and wrapping it in a MessageView (aka: 'd').
  - getDeserializeLatenciesTo
```
void getDeserializeLatenciesTo(SrvMonIntSeries val)
```
    Copies the value of SrvMonIntSeries into the provided value.
    IF the value is not set, then the contents of the provided SrvMonIntSeries are cleared.
    
    Parameters:
    val - the value to copy into
    See Also:
    SrvMonIntSeries.copyInto(SrvMonIntSeries)
  - takeDeserializeLatencies
```
SrvMonIntSeries takeDeserializeLatencies()
```
    'Takes' a reference to the deserializeLatencies field from the message.
    Field Description
    The time (in microseconds) spent deserializing the message and wrapping it in a MessageView (aka: 'd').
    NOTE:
    A nested entity reference returned by getXXX() is only valid until the entity is disposed i.e. the act of getting an entity does not transfer ownership of the entity to the application A message disposes of its reference to its contained entities when it is disposed itself.
    An AEP engine disposes a message on return from its message handler. Therefore, applications working with AEP engines that wish to hold onto a nested entity reference post return from its containing message's handler must either acquire a reference to the container message or 'take' the nested entity itself from the container message. The act of 'taking' an entity differs from 'getting' an entity in that 'take' does what is necessary to ensure that the entity contents are not cleared and the entity not disposed when the message itself is disposed. For a taken entity to be disposed, the application must explicitly dispose it when done working with it.
    
    Returns:
    a 'taken' reference to the field or null if the field is not set.
  - hasDeserializeLatencies
```
boolean hasDeserializeLatencies()
```
    Checks for the presence of 'deserializeLatencies'.
    Field Description
    The time (in microseconds) spent deserializing the message and wrapping it in a MessageView (aka: 'd').
    
    See Also:
    getDeserializeLatencies()
  - clearDeserializeLatencies
```
void clearDeserializeLatencies()
```
    Clears the value of 'deserializeLatencies'.
    Field Description
    The time (in microseconds) spent deserializing the message and wrapping it in a MessageView (aka: 'd').
    
    See Also:
    setDeserializeLatencies(SrvMonIntSeries)
  - setDeserializeToReceiveLatencies
```
void setDeserializeToReceiveLatencies(SrvMonIntSeries val)
```
    Sets the value of 'deserializeToReceiveLatencies'.
    Field Description
    The time (in microseconds) from when the message was deserialized to when it is received by the engine (aka: 'd2i').
    This measure the time from when the bus has deserialized by the bus to when the app's engine picks it up from it's input queue (before it dispatches it to an application) handler (it includes the o2p time of the engine's disruptor). Additional time spent by the engine dispatching the message to the application handler is covered by msgPreProcLatencies (mpproc).
    
    Parameters:
    val - The value to set.
  - lendDeserializeToReceiveLatencies
```
void lendDeserializeToReceiveLatencies(SrvMonIntSeries val)
```
    'Lends' a reference of the SrvMonIntSeries to the message for this field.
    Field Description
    The time (in microseconds) from when the message was deserialized to when it is received by the engine (aka: 'd2i').
    This measure the time from when the bus has deserialized by the bus to when the app's engine picks it up from it's input queue (before it dispatches it to an application) handler (it includes the o2p time of the engine's disruptor). Additional time spent by the engine dispatching the message to the application handler is covered by msgPreProcLatencies (mpproc).
    NOTE:
    It is illegal to hold onto an entity 'set' on a message post the disposal of the container message. This is true even if a reference to the entity is explicitly 'acquired' by the application via acquire().
    To hold onto the reference of an entity beyond the lifecycle of its container message, an application must own a reference to the entity (via, for example, 'taking' the entity off an inbound message) and then 'lend' the entity to the message for sending. The act of 'lending' an entity to a message implies that the application continues to own the entity even though the message is holding a reference to it for the duration of the send.
    
    Parameters:
    val - the value to 'lend' to lend.
  - getDeserializeToReceiveLatencies
```
SrvMonIntSeries getDeserializeToReceiveLatencies()
```
    Gets the value of 'deserializeToReceiveLatencies'.
    Field Description
    The time (in microseconds) from when the message was deserialized to when it is received by the engine (aka: 'd2i').
    This measure the time from when the bus has deserialized by the bus to when the app's engine picks it up from it's input queue (before it dispatches it to an application) handler (it includes the o2p time of the engine's disruptor). Additional time spent by the engine dispatching the message to the application handler is covered by msgPreProcLatencies (mpproc).
    
    Returns:
    the time (in microseconds) from when the message was deserialized to when it is received by the engine (aka: 'd2i').
  - getDeserializeToReceiveLatenciesTo
```
void getDeserializeToReceiveLatenciesTo(SrvMonIntSeries val)
```
    Copies the value of SrvMonIntSeries into the provided value.
    IF the value is not set, then the contents of the provided SrvMonIntSeries are cleared.
    
    Parameters:
    val - the value to copy into
    See Also:
    SrvMonIntSeries.copyInto(SrvMonIntSeries)
  - takeDeserializeToReceiveLatencies
```
SrvMonIntSeries takeDeserializeToReceiveLatencies()
```
    'Takes' a reference to the deserializeToReceiveLatencies field from the message.
    Field Description
    The time (in microseconds) from when the message was deserialized to when it is received by the engine (aka: 'd2i').
    This measure the time from when the bus has deserialized by the bus to when the app's engine picks it up from it's input queue (before it dispatches it to an application) handler (it includes the o2p time of the engine's disruptor). Additional time spent by the engine dispatching the message to the application handler is covered by msgPreProcLatencies (mpproc).
    NOTE:
    A nested entity reference returned by getXXX() is only valid until the entity is disposed i.e. the act of getting an entity does not transfer ownership of the entity to the application A message disposes of its reference to its contained entities when it is disposed itself.
    An AEP engine disposes a message on return from its message handler. Therefore, applications working with AEP engines that wish to hold onto a nested entity reference post return from its containing message's handler must either acquire a reference to the container message or 'take' the nested entity itself from the container message. The act of 'taking' an entity differs from 'getting' an entity in that 'take' does what is necessary to ensure that the entity contents are not cleared and the entity not disposed when the message itself is disposed. For a taken entity to be disposed, the application must explicitly dispose it when done working with it.
    
    Returns:
    a 'taken' reference to the field or null if the field is not set.
  - hasDeserializeToReceiveLatencies
```
boolean hasDeserializeToReceiveLatencies()
```
    Checks for the presence of 'deserializeToReceiveLatencies'.
    Field Description
    The time (in microseconds) from when the message was deserialized to when it is received by the engine (aka: 'd2i').
    This measure the time from when the bus has deserialized by the bus to when the app's engine picks it up from it's input queue (before it dispatches it to an application) handler (it includes the o2p time of the engine's disruptor). Additional time spent by the engine dispatching the message to the application handler is covered by msgPreProcLatencies (mpproc).
    
    See Also:
    getDeserializeToReceiveLatencies()
  - clearDeserializeToReceiveLatencies
```
void clearDeserializeToReceiveLatencies()
```
    Clears the value of 'deserializeToReceiveLatencies'.
    Field Description
    The time (in microseconds) from when the message was deserialized to when it is received by the engine (aka: 'd2i').
    This measure the time from when the bus has deserialized by the bus to when the app's engine picks it up from it's input queue (before it dispatches it to an application) handler (it includes the o2p time of the engine's disruptor). Additional time spent by the engine dispatching the message to the application handler is covered by msgPreProcLatencies (mpproc).
    
    See Also:
    setDeserializeToReceiveLatencies(SrvMonIntSeries)
  - setOriginToReceiveLatencies
```
void setOriginToReceiveLatencies(SrvMonIntSeries val)
```
    Sets the value of 'originToReceiveLatencies'.
    Field Description
    The origin to receive latencies in microseconds (aka: 'o2i').
    The time from when a message was originally created to when it was received by the binding.
    
    Parameters:
    val - The value to set.
  - lendOriginToReceiveLatencies
```
void lendOriginToReceiveLatencies(SrvMonIntSeries val)
```
    'Lends' a reference of the SrvMonIntSeries to the message for this field.
    Field Description
    The origin to receive latencies in microseconds (aka: 'o2i').
    The time from when a message was originally created to when it was received by the binding.
    NOTE:
    It is illegal to hold onto an entity 'set' on a message post the disposal of the container message. This is true even if a reference to the entity is explicitly 'acquired' by the application via acquire().
    To hold onto the reference of an entity beyond the lifecycle of its container message, an application must own a reference to the entity (via, for example, 'taking' the entity off an inbound message) and then 'lend' the entity to the message for sending. The act of 'lending' an entity to a message implies that the application continues to own the entity even though the message is holding a reference to it for the duration of the send.
    
    Parameters:
    val - the value to 'lend' to lend.
  - getOriginToReceiveLatencies
```
SrvMonIntSeries getOriginToReceiveLatencies()
```
    Gets the value of 'originToReceiveLatencies'.
    Field Description
    The origin to receive latencies in microseconds (aka: 'o2i').
    The time from when a message was originally created to when it was received by the binding.
    
    Returns:
    The origin to receive latencies in microseconds (aka: 'o2i').
  - getOriginToReceiveLatenciesTo
```
void getOriginToReceiveLatenciesTo(SrvMonIntSeries val)
```
    Copies the value of SrvMonIntSeries into the provided value.
    IF the value is not set, then the contents of the provided SrvMonIntSeries are cleared.
    
    Parameters:
    val - the value to copy into
    See Also:
    SrvMonIntSeries.copyInto(SrvMonIntSeries)
  - takeOriginToReceiveLatencies
```
SrvMonIntSeries takeOriginToReceiveLatencies()
```
    'Takes' a reference to the originToReceiveLatencies field from the message.
    Field Description
    The origin to receive latencies in microseconds (aka: 'o2i').
    The time from when a message was originally created to when it was received by the binding.
    NOTE:
    A nested entity reference returned by getXXX() is only valid until the entity is disposed i.e. the act of getting an entity does not transfer ownership of the entity to the application A message disposes of its reference to its contained entities when it is disposed itself.
    An AEP engine disposes a message on return from its message handler. Therefore, applications working with AEP engines that wish to hold onto a nested entity reference post return from its containing message's handler must either acquire a reference to the container message or 'take' the nested entity itself from the container message. The act of 'taking' an entity differs from 'getting' an entity in that 'take' does what is necessary to ensure that the entity contents are not cleared and the entity not disposed when the message itself is disposed. For a taken entity to be disposed, the application must explicitly dispose it when done working with it.
    
    Returns:
    a 'taken' reference to the field or null if the field is not set.
  - hasOriginToReceiveLatencies
```
boolean hasOriginToReceiveLatencies()
```
    Checks for the presence of 'originToReceiveLatencies'.
    Field Description
    The origin to receive latencies in microseconds (aka: 'o2i').
    The time from when a message was originally created to when it was received by the binding.
    
    See Also:
    getOriginToReceiveLatencies()
  - clearOriginToReceiveLatencies
```
void clearOriginToReceiveLatencies()
```
    Clears the value of 'originToReceiveLatencies'.
    Field Description
    The origin to receive latencies in microseconds (aka: 'o2i').
    The time from when a message was originally created to when it was received by the binding.
    
    See Also:
    setOriginToReceiveLatencies(SrvMonIntSeries)
  - setWireToWireLatencies
```
void setWireToWireLatencies(SrvMonIntSeries val)
```
    Sets the value of 'wireToWireLatencies'.
    Field Description
    The wire to wire latencies in microseconds, for outbound messages the time from when the corresponding inbound message was received off the wire to when the outbound message was written to the wire. (aka: 'w2w').
    This measurement is useful for determine how long the process spent from receiving a message to making its effects to the world 'known'.
    
    Parameters:
    val - The value to set.
  - lendWireToWireLatencies
```
void lendWireToWireLatencies(SrvMonIntSeries val)
```
    'Lends' a reference of the SrvMonIntSeries to the message for this field.
    Field Description
    The wire to wire latencies in microseconds, for outbound messages the time from when the corresponding inbound message was received off the wire to when the outbound message was written to the wire. (aka: 'w2w').
    This measurement is useful for determine how long the process spent from receiving a message to making its effects to the world 'known'.
    NOTE:
    It is illegal to hold onto an entity 'set' on a message post the disposal of the container message. This is true even if a reference to the entity is explicitly 'acquired' by the application via acquire().
    To hold onto the reference of an entity beyond the lifecycle of its container message, an application must own a reference to the entity (via, for example, 'taking' the entity off an inbound message) and then 'lend' the entity to the message for sending. The act of 'lending' an entity to a message implies that the application continues to own the entity even though the message is holding a reference to it for the duration of the send.
    
    Parameters:
    val - the value to 'lend' to lend.
  - getWireToWireLatencies
```
SrvMonIntSeries getWireToWireLatencies()
```
    Gets the value of 'wireToWireLatencies'.
    Field Description
    The wire to wire latencies in microseconds, for outbound messages the time from when the corresponding inbound message was received off the wire to when the outbound message was written to the wire. (aka: 'w2w').
    This measurement is useful for determine how long the process spent from receiving a message to making its effects to the world 'known'.
    
    Returns:
    The wire to wire latencies in microseconds, for outbound messages the time from when the corresponding inbound message was received off the wire to when the outbound message was written to the wire. (aka: 'w2w').
  - getWireToWireLatenciesTo
```
void getWireToWireLatenciesTo(SrvMonIntSeries val)
```
    Copies the value of SrvMonIntSeries into the provided value.
    IF the value is not set, then the contents of the provided SrvMonIntSeries are cleared.
    
    Parameters:
    val - the value to copy into
    See Also:
    SrvMonIntSeries.copyInto(SrvMonIntSeries)
  - takeWireToWireLatencies
```
SrvMonIntSeries takeWireToWireLatencies()
```
    'Takes' a reference to the wireToWireLatencies field from the message.
    Field Description
    The wire to wire latencies in microseconds, for outbound messages the time from when the corresponding inbound message was received off the wire to when the outbound message was written to the wire. (aka: 'w2w').
    This measurement is useful for determine how long the process spent from receiving a message to making its effects to the world 'known'.
    NOTE:
    A nested entity reference returned by getXXX() is only valid until the entity is disposed i.e. the act of getting an entity does not transfer ownership of the entity to the application A message disposes of its reference to its contained entities when it is disposed itself.
    An AEP engine disposes a message on return from its message handler. Therefore, applications working with AEP engines that wish to hold onto a nested entity reference post return from its containing message's handler must either acquire a reference to the container message or 'take' the nested entity itself from the container message. The act of 'taking' an entity differs from 'getting' an entity in that 'take' does what is necessary to ensure that the entity contents are not cleared and the entity not disposed when the message itself is disposed. For a taken entity to be disposed, the application must explicitly dispose it when done working with it.
    
    Returns:
    a 'taken' reference to the field or null if the field is not set.
  - hasWireToWireLatencies
```
boolean hasWireToWireLatencies()
```
    Checks for the presence of 'wireToWireLatencies'.
    Field Description
    The wire to wire latencies in microseconds, for outbound messages the time from when the corresponding inbound message was received off the wire to when the outbound message was written to the wire. (aka: 'w2w').
    This measurement is useful for determine how long the process spent from receiving a message to making its effects to the world 'known'.
    
    See Also:
    getWireToWireLatencies()
  - clearWireToWireLatencies
```
void clearWireToWireLatencies()
```
    Clears the value of 'wireToWireLatencies'.
    Field Description
    The wire to wire latencies in microseconds, for outbound messages the time from when the corresponding inbound message was received off the wire to when the outbound message was written to the wire. (aka: 'w2w').
    This measurement is useful for determine how long the process spent from receiving a message to making its effects to the world 'known'.
    
    See Also:
    setWireToWireLatencies(SrvMonIntSeries)
  - setDisruptorStats
```
void setDisruptorStats(SrvMonDisruptorStats val)
```
    Sets the value of 'disruptorStats'.
    Field Description
    Disruptor statistics for the bus when operating in detached mode.
    
    Parameters:
    val - The value to set.
  - lendDisruptorStats
```
void lendDisruptorStats(SrvMonDisruptorStats val)
```
    'Lends' a reference of the SrvMonDisruptorStats to the message for this field.
    Field Description
    Disruptor statistics for the bus when operating in detached mode.
    NOTE:
    It is illegal to hold onto an entity 'set' on a message post the disposal of the container message. This is true even if a reference to the entity is explicitly 'acquired' by the application via acquire().
    To hold onto the reference of an entity beyond the lifecycle of its container message, an application must own a reference to the entity (via, for example, 'taking' the entity off an inbound message) and then 'lend' the entity to the message for sending. The act of 'lending' an entity to a message implies that the application continues to own the entity even though the message is holding a reference to it for the duration of the send.
    
    Parameters:
    val - the value to 'lend' to lend.
  - getDisruptorStats
```
SrvMonDisruptorStats getDisruptorStats()
```
    Gets the value of 'disruptorStats'.
    Field Description
    Disruptor statistics for the bus when operating in detached mode.
    
    Returns:
    Disruptor statistics for the bus when operating in detached mode.
  - getDisruptorStatsTo
```
void getDisruptorStatsTo(SrvMonDisruptorStats val)
```
    Copies the value of SrvMonDisruptorStats into the provided value.
    IF the value is not set, then the contents of the provided SrvMonDisruptorStats are cleared.
    
    Parameters:
    val - the value to copy into
    See Also:
    SrvMonDisruptorStats.copyInto(SrvMonDisruptorStats)
  - takeDisruptorStats
```
SrvMonDisruptorStats takeDisruptorStats()
```
    'Takes' a reference to the disruptorStats field from the message.
    Field Description
    Disruptor statistics for the bus when operating in detached mode.
    NOTE:
    A nested entity reference returned by getXXX() is only valid until the entity is disposed i.e. the act of getting an entity does not transfer ownership of the entity to the application A message disposes of its reference to its contained entities when it is disposed itself.
    An AEP engine disposes a message on return from its message handler. Therefore, applications working with AEP engines that wish to hold onto a nested entity reference post return from its containing message's handler must either acquire a reference to the container message or 'take' the nested entity itself from the container message. The act of 'taking' an entity differs from 'getting' an entity in that 'take' does what is necessary to ensure that the entity contents are not cleared and the entity not disposed when the message itself is disposed. For a taken entity to be disposed, the application must explicitly dispose it when done working with it.
    
    Returns:
    a 'taken' reference to the field or null if the field is not set.
  - hasDisruptorStats
```
boolean hasDisruptorStats()
```
    Checks for the presence of 'disruptorStats'.
    Field Description
    Disruptor statistics for the bus when operating in detached mode.
    
    See Also:
    getDisruptorStats()
  - clearDisruptorStats
```
void clearDisruptorStats()
```
    Clears the value of 'disruptorStats'.
    Field Description
    Disruptor statistics for the bus when operating in detached mode.
    
    See Also:
    setDisruptorStats(SrvMonDisruptorStats)
  - setSendToPollLatencies
```
void setSendToPollLatencies(SrvMonIntSeries val)
```
    Sets the value of 'sendToPollLatencies'.
    Field Description
    When the bus is operating in a detached mode, the time from when the message was offered for send until it is picked up send is started (aka: 'o2p').
    
    Parameters:
    val - The value to set.
  - lendSendToPollLatencies
```
void lendSendToPollLatencies(SrvMonIntSeries val)
```
    'Lends' a reference of the SrvMonIntSeries to the message for this field.
    Field Description
    When the bus is operating in a detached mode, the time from when the message was offered for send until it is picked up send is started (aka: 'o2p').
    NOTE:
    It is illegal to hold onto an entity 'set' on a message post the disposal of the container message. This is true even if a reference to the entity is explicitly 'acquired' by the application via acquire().
    To hold onto the reference of an entity beyond the lifecycle of its container message, an application must own a reference to the entity (via, for example, 'taking' the entity off an inbound message) and then 'lend' the entity to the message for sending. The act of 'lending' an entity to a message implies that the application continues to own the entity even though the message is holding a reference to it for the duration of the send.
    
    Parameters:
    val - the value to 'lend' to lend.
  - getSendToPollLatencies
```
SrvMonIntSeries getSendToPollLatencies()
```
    Gets the value of 'sendToPollLatencies'.
    Field Description
    When the bus is operating in a detached mode, the time from when the message was offered for send until it is picked up send is started (aka: 'o2p').
    
    Returns:
    When the bus is operating in a detached mode, the time from when the message was offered for send until it is picked up send is started (aka: 'o2p').
  - getSendToPollLatenciesTo
```
void getSendToPollLatenciesTo(SrvMonIntSeries val)
```
    Copies the value of SrvMonIntSeries into the provided value.
    IF the value is not set, then the contents of the provided SrvMonIntSeries are cleared.
    
    Parameters:
    val - the value to copy into
    See Also:
    SrvMonIntSeries.copyInto(SrvMonIntSeries)
  - takeSendToPollLatencies
```
SrvMonIntSeries takeSendToPollLatencies()
```
    'Takes' a reference to the sendToPollLatencies field from the message.
    Field Description
    When the bus is operating in a detached mode, the time from when the message was offered for send until it is picked up send is started (aka: 'o2p').
    NOTE:
    A nested entity reference returned by getXXX() is only valid until the entity is disposed i.e. the act of getting an entity does not transfer ownership of the entity to the application A message disposes of its reference to its contained entities when it is disposed itself.
    An AEP engine disposes a message on return from its message handler. Therefore, applications working with AEP engines that wish to hold onto a nested entity reference post return from its containing message's handler must either acquire a reference to the container message or 'take' the nested entity itself from the container message. The act of 'taking' an entity differs from 'getting' an entity in that 'take' does what is necessary to ensure that the entity contents are not cleared and the entity not disposed when the message itself is disposed. For a taken entity to be disposed, the application must explicitly dispose it when done working with it.
    
    Returns:
    a 'taken' reference to the field or null if the field is not set.
  - hasSendToPollLatencies
```
boolean hasSendToPollLatencies()
```
    Checks for the presence of 'sendToPollLatencies'.
    Field Description
    When the bus is operating in a detached mode, the time from when the message was offered for send until it is picked up send is started (aka: 'o2p').
    
    See Also:
    getSendToPollLatencies()
  - clearSendToPollLatencies
```
void clearSendToPollLatencies()
```
    Clears the value of 'sendToPollLatencies'.
    Field Description
    When the bus is operating in a detached mode, the time from when the message was offered for send until it is picked up send is started (aka: 'o2p').
    
    See Also:
    setSendToPollLatencies(SrvMonIntSeries)
  - setWireSendLatencies
```
void setWireSendLatencies(SrvMonIntSeries val)
```
    Sets the value of 'wireSendLatencies'.
    Field Description
    The wire send latencies in microseconds, he time spent by the message bus provider writing the message to the wire. (aka: 'ws').
    This time covers an time spent blocked in the provider due to flow control and time in the provider implementation's send api.
    
    Parameters:
    val - The value to set.
  - lendWireSendLatencies
```
void lendWireSendLatencies(SrvMonIntSeries val)
```
    'Lends' a reference of the SrvMonIntSeries to the message for this field.
    Field Description
    The wire send latencies in microseconds, he time spent by the message bus provider writing the message to the wire. (aka: 'ws').
    This time covers an time spent blocked in the provider due to flow control and time in the provider implementation's send api.
    NOTE:
    It is illegal to hold onto an entity 'set' on a message post the disposal of the container message. This is true even if a reference to the entity is explicitly 'acquired' by the application via acquire().
    To hold onto the reference of an entity beyond the lifecycle of its container message, an application must own a reference to the entity (via, for example, 'taking' the entity off an inbound message) and then 'lend' the entity to the message for sending. The act of 'lending' an entity to a message implies that the application continues to own the entity even though the message is holding a reference to it for the duration of the send.
    
    Parameters:
    val - the value to 'lend' to lend.
  - getWireSendLatencies
```
SrvMonIntSeries getWireSendLatencies()
```
    Gets the value of 'wireSendLatencies'.
    Field Description
    The wire send latencies in microseconds, he time spent by the message bus provider writing the message to the wire. (aka: 'ws').
    This time covers an time spent blocked in the provider due to flow control and time in the provider implementation's send api.
    
    Returns:
    The wire send latencies in microseconds, he time spent by the message bus provider writing the message to the wire. (aka: 'ws').
  - getWireSendLatenciesTo
```
void getWireSendLatenciesTo(SrvMonIntSeries val)
```
    Copies the value of SrvMonIntSeries into the provided value.
    IF the value is not set, then the contents of the provided SrvMonIntSeries are cleared.
    
    Parameters:
    val - the value to copy into
    See Also:
    SrvMonIntSeries.copyInto(SrvMonIntSeries)
  - takeWireSendLatencies
```
SrvMonIntSeries takeWireSendLatencies()
```
    'Takes' a reference to the wireSendLatencies field from the message.
    Field Description
    The wire send latencies in microseconds, he time spent by the message bus provider writing the message to the wire. (aka: 'ws').
    This time covers an time spent blocked in the provider due to flow control and time in the provider implementation's send api.
    NOTE:
    A nested entity reference returned by getXXX() is only valid until the entity is disposed i.e. the act of getting an entity does not transfer ownership of the entity to the application A message disposes of its reference to its contained entities when it is disposed itself.
    An AEP engine disposes a message on return from its message handler. Therefore, applications working with AEP engines that wish to hold onto a nested entity reference post return from its containing message's handler must either acquire a reference to the container message or 'take' the nested entity itself from the container message. The act of 'taking' an entity differs from 'getting' an entity in that 'take' does what is necessary to ensure that the entity contents are not cleared and the entity not disposed when the message itself is disposed. For a taken entity to be disposed, the application must explicitly dispose it when done working with it.
    
    Returns:
    a 'taken' reference to the field or null if the field is not set.
  - hasWireSendLatencies
```
boolean hasWireSendLatencies()
```
    Checks for the presence of 'wireSendLatencies'.
    Field Description
    The wire send latencies in microseconds, he time spent by the message bus provider writing the message to the wire. (aka: 'ws').
    This time covers an time spent blocked in the provider due to flow control and time in the provider implementation's send api.
    
    See Also:
    getWireSendLatencies()
  - clearWireSendLatencies
```
void clearWireSendLatencies()
```
    Clears the value of 'wireSendLatencies'.
    Field Description
    The wire send latencies in microseconds, he time spent by the message bus provider writing the message to the wire. (aka: 'ws').
    This time covers an time spent blocked in the provider due to flow control and time in the provider implementation's send api.
    
    See Also:
    setWireSendLatencies(SrvMonIntSeries)

Interface ISrvMonAppBusBindingStats

ADM Details

Method Summary

Methods inherited from interface com.neeve.rog.IRogValidatable

Method Detail

setNumMsgsRcvd

Field Description

getNumMsgsRcvd

Field Description

clearNumMsgsRcvd

Field Description

hasNumMsgsRcvd

Field Description

setNumMsgsInBatchesRcvd

Field Description

getNumMsgsInBatchesRcvd

Field Description

clearNumMsgsInBatchesRcvd

Field Description

hasNumMsgsInBatchesRcvd

Field Description

setNumMsgBatchesRcvd

Field Description

getNumMsgBatchesRcvd

Field Description

clearNumMsgBatchesRcvd

Field Description

hasNumMsgBatchesRcvd

Field Description

setNumMsgsEnqueued

Field Description

getNumMsgsEnqueued

Field Description

clearNumMsgsEnqueued

Field Description

hasNumMsgsEnqueued

Field Description

setNumMsgsSent

Field Description

getNumMsgsSent

Field Description

clearNumMsgsSent

Field Description

hasNumMsgsSent

Field Description

setNumFlushesSync

Field Description

getNumFlushesSync

Field Description

clearNumFlushesSync

Field Description

hasNumFlushesSync

Field Description

setNumMsgsFlushedSync

Field Description

getNumMsgsFlushedSync

Field Description

clearNumMsgsFlushedSync

Field Description

hasNumMsgsFlushedSync

Field Description

setNumFlushesAsync

Field Description

getNumFlushesAsync

Field Description

clearNumFlushesAsync

Field Description

hasNumFlushesAsync

Field Description

setNumAsyncFlushCompletions

Field Description

getNumAsyncFlushCompletions

Field Description

clearNumAsyncFlushCompletions

Field Description

hasNumAsyncFlushCompletions

Field Description

setNumMsgsFlushedAsync

Field Description

getNumMsgsFlushedAsync